Search:

Thanks for the help fellas

okay cool.
just wanted to make sure that ek4 was definitely plug and play

so i cant just use the ek4 loom as plug and play?

Closed

and immobiliser was swapped in to the existing system. its all fine and working well

so wrong loom? cool.....
is there anyway of getting running?
can i just use the ecu plugs off of the type r loom??

yeah only 2 plugs on the harness.....

I just checked continuity and this is what i got. due to the amount of negatives i have im assuming there is a wiring issue

Pin 1 +
pin 5 +

Pin 2 -
Pin 3 -
pin 6 -
Pin 7 -

i may have an ek9 loom. that im not sure about but it is b not a.
I'm almost 100% other than the three or four which were the same colour.
i have a new main relay and still nothing

I've done the jumper test from pin 5 to 7 and have fuel pump action. although it doesnt shut off. is that because its the main relays job to shut off?

And ecu definitely clicks.

i've just finished doing a b18c type r swap from a dc2 into my ek1.
I'm using an ek4 harness and an obd2a to obd2b adapter and using the original dc2 ecu.
I lengthened the wiring harness to the ecu...