Search:

That is a very helpful book when you are new to the whole rebuilding process

Its sizing..

Beeza, that is not the way to do it matey.

It's very obscure and far from ideal. I would not trust the comments in a strange youtube video to tell you how to properly carry out something as...

:thumbsup:

With old engines like these it's almost not even worth it if you don't do most of the tear down and assembly yourself.

http://www.ozhonda.com/forum/customavatars/avatar29948_18.gif

http://bfy.tw/C0j8

first result

Dafuq are you on about?

I'm saying that new piston rings need a honed cylinder wall to break-in.

You are telling me that it's possible to simply fit a new set of pistons and rings without any...

Lol how will the new piston rings break-in if the cylinders aren't honed? I'm intrigued.

The engine is generally removed from the vehicle and completely pulled apart. The block needs to be bare to be bored and honed..

There's heaps of info around the web on rebuilding engines. I...

I remember that RS machines pistons used to be popular for B series rebuilds. Not sure what they cost but it might be worth having a look at.

Don't really know about NPR, never heard of them.

Pull the code from the ECU and you'll know which sensor is throwing the code. The old paperclip trick usually works if you don't have a scanner or an aftermarket ECU. If you have an S300 just plug...

He's talking about one of the cam cap bolts guise. 4 of them have a stud on top.

The cam cap bolts with 12mm heads should be 20ft-lb lad. Here you go:...