Search:

BUMPING an old thread to inform everyone of the incorrect RDA part numbers given to me before.

The CRV front rotors were 3mm thinner than the ODC's and after 2 years of driving, the brake pads...

KIA = KILLED IN ACTION.. do not get

Hi all, just an update on how I did my ATF flush on the ODC RB1. This process is so much easier and efficient, rather than doing the 3 flushes approach. You guys might want to consider this approach....

Hi guys,

Can anyone shed some light to this error? Car drives normally but the yellow seatbelt light will come on and stay on. (indicator is on right corner of the cluster near the trip reset pin)...

yup went for bendix GCT as they were good for stop start everyday driving, and not harsh on the rotors.

I really think the dimpled & slots are overkill for a slow ass car but overall my braking...

Hi guys,

Just want to give a heads up on the part numbers of RDA rotors and bendix pads in case anyone needs it.

RDA 7908 - Front Rotors (Same as CRV 2006 on models) EDIT WRONG PART NUMBER...

Not answering the question here.. Not talking about the red arrow on the filter per se, but rather which way the arrow should be facing when installed on the car. Question is filter facing towards...

ya totally.. but it kinda made sense after searching on driveaccord.net

Everyone says arrow pointing towards firewall / cabin, with even 1 attempt to start the car and quickly turn it off to see...

which way should the filter face? rather confused by this DIY and Fredoops' comment on arrow facing cabin.

Anyone?

Just to confirm the flow of ATF is towards the cabin / firewall? and I should have the arrow pointing towards the cabin?

Have anyone done an ATF oil flush and change on their Rb1?

The ODC is my first ever automatic vehicle owned and I was reading CL9 & CU2 sticky threads on their auto trans. Makes it lil scary...

Thanks for the reply. I read on a post before and you were saying that a 7pk1750 is ok to use but a 1760mm should be the correct length.

Mine's a 69inch belt, converted to mm is 1752.6mm belt, it...

Hi guys

Just changed my belt and tensioner and it squealing !!

I bought a gates K070690 belt and a gates tensioner with pulley and now everytime when it starts from cold. A chirp like squeal...

when the VSA comes on while driving, does it feel as though you hit a brick wall and the car becomes sluggish?

If so, you have to replace the accelerator position sensor found under the bonnet,...

does the VSA light come on the cluster?

^^This is what bendix says on their website. Can you confirm they are spot on?

I have been given part numbers like DB1515 for fronts and DB1142 for rears.

All help appreciated. Thanks

sorry for reviving an old thread.

Can any FD1 owners confirm brake pads front & rear in bendix part numbers? I do not think what they have online is accurate

FD1 runs on a R18 engine if this...

nuff said.. move to WA and all's good

Brembo's good but might be overpriced for a OEM replacement pad, since you are running on bendix rears at the moment, are they the same as DB1847 ^^ as above

not sure if bendix is correct with the pad part numbers but if anyone has a brake pad from your odc lying around can you verify if they are the same as below?
...

Thanks for the info. what were your RDA rear extreme pads part number as well? Will be great if I just settle all things RDA.

Not sure if EBC has brake pads for the RB1

Cool do u have the RDA part numbers for the rotors?

Can someone confirm front rotors are the 300mm version same as cl9 euro?

Hi all,

Couldn't find any info on part numbers for the Ody RB1 so thought of starting a thread. Those part numbers online on bendix and dba are "more-often-than-not" inaccurate especially when it...

Very good info. Looks like i might just be getting the K24 clutch and machine OEM flywheel
The K24 aren't much of a revving machine due to bigger displacement and will not be wise to get like a...

Hi everyone,

i know this has been covered more often than not. But i need to make a decision here.

Euro is relatively stock and used daily

My question is that is it worth going for the K20...