Page 1 of 2 12 LastLast
Results 1 to 12 of 18
  1. #1
    Member Array
    Join Date
    Aug 2006
    Location
    murarrie
    Car:
    EG Si Hatchie

    bb electric prelude seats into eg?

    i was getting some parts at honda rec down the coast and was inquiring about dc2 seats for my eg when the guy said that he had a eg in the other day wrecked that had prelude seats in it. he said it looked like they were stock and meant to be there. how is that possible? i have a set of electric prelude seats that i can use. does anyone know how to swap them in?
    Is this the end of my car modding days? Buying a house says so...

  2. #2
    Member Array
    Join Date
    Nov 2007
    Location
    Sydney
    Car:
    EP3R>AH>EK>DC2
    Seen the leather Seats in a Dc2/4 before and watched it happen.

    I believe one of the rails are swappable between the DC2 and Prelude seats that cause the seats to be bolt on.

    Should be a similar deal with a EG?

    If you contact bennjamin he kinda watched the process aswell so he may be able to help a bit better
    Last edited by SHOGUNOVDDRK; 21-12-2008 at 04:25 PM.
    SPAMMAPS
    Carburettor|Nation

    that mikey G guy is the biggest shit talker ive ever met..
    in the space of 15minutes he sold two sets of wheels. claims a guy under the username DNT-CRY bought them!

  3. #3
    Member Array
    Join Date
    Aug 2006
    Location
    murarrie
    Car:
    EG Si Hatchie
    i've got a few days off after new years where i can attempt the swap. if i am succesful do i need to get it engineered? it is a oem honda seat and in the past i have swapped stock vr seats for oe calais ones and never even batted an eyelid about it but since i am modifying the rail this time do i have to?
    Is this the end of my car modding days? Buying a house says so...

  4. #4
    Member Array
    Join Date
    Jul 2007
    Location
    JDMD15B
    Car:
    14EGs/8EDs/3EKs
    You shouldn't have a problem with it even with modifying rails, people have bucket seats out there which are ADR approved so what's stopping you from putting in a factory seat in there ?

    Cheers
    JDM D15B - you wouldn't understand

    No K-SWAP ? No worries - Unfriend

  5. #5
    Member Array
    Join Date
    Aug 2006
    Location
    murarrie
    Car:
    EG Si Hatchie

    They are IN!

    got them in and thought i'd share some pics. they look like they are meant to be there. will they need to be mod plated? they look and feel super sexy!



    electric controls driver side

    just realised i accidently mirrored this image

    awesome lateral support
    Is this the end of my car modding days? Buying a house says so...

  6. #6
    Member Array
    Join Date
    Feb 2006
    Location
    sydney yo
    Car:
    green whip!
    so how do the electrics work? just a 12v connection is it?

  7. #7
    Member Array
    Join Date
    Aug 2006
    Location
    murarrie
    Car:
    EG Si Hatchie
    yeah one to constant 12v so it works all the time not just when i have acc on. the amount you can adjust the drivers side is awesome with electric ones. infinite number of positions not just clicks. you can adjust front/back, back bit's tilt, seat up and down and seat part tilt all electric and lumbar support is a lever on the side.
    Is this the end of my car modding days? Buying a house says so...

  8. #8
    Member Array
    Join Date
    Apr 2004
    Location
    Melbourne
    Car:
    EG, GC8
    did u just swap over the rails or is there more modification to make them fit.

  9. #9
    Member Array
    Join Date
    Nov 2007
    Location
    Sydney
    Car:
    EP3R>AH>EK>DC2
    Good work.

    Safe to assume a Write up will be coming?
    SPAMMAPS
    Carburettor|Nation

    that mikey G guy is the biggest shit talker ive ever met..
    in the space of 15minutes he sold two sets of wheels. claims a guy under the username DNT-CRY bought them!

  10. #10
    Member Array
    Join Date
    Sep 2007
    Location
    CQ
    Car:
    Civic
    I'd get them engineered as having oem recaros in a Civic from the Teg or EK9 requires a mod plate, just to be safe or cop a $2XX fine and 3 points

    Looks unreal I'd like to find some leather DC5 seats for mine to fit in
    WTB: EK oem JDM Visors

    I love J-Cups

  11. #11
    Member Array
    Join Date
    Jun 2007
    Location
    Victoria
    Car:
    Civic EG4 GLi
    They don't look out of place so I'd be pretty surprised if a cop even noticed, but better safe then sorry I guess.

    Nice and Unique!

  12. #12
    Newcomer Array
    Join Date
    Oct 2007
    Location
    Sydney
    Car:
    EK1
    that looks pretty awesome =D. Have dc5 leathers in mine =)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.