Page 1 of 2 12 LastLast
Results 1 to 12 of 14
  1. #1

    How to make a silencer for an exhaust.

    having bad troubles looking for a silencer on my car and not being able to either find or afford one -.- my mate said you would be able to make one but how exactly? it needs to be fitted on a 3inch muffler pleaseeee need help urgently before the cops start to defect me for noise pollution :'(

  2. #2
    Member Array
    Join Date
    Oct 2006
    Location
    Hunter Valley NSW
    Car:
    lownslowsedan
    take it too an exhaust shop and ask.
    to see all of my build, checkout


  3. #3
    Member Array
    Join Date
    Sep 2007
    Location
    CQ
    Car:
    Civic
    prob less hassel just buying a muffler that has one already fitted, otherwise you'd have to custom make one, drill into your existing muffler, etc etc

    buy a new muffler, weld it up, problem solved, seen a few nice ones forsale at Midas the other day

    or put another resonator in the system to quiet it down
    WTB: EK oem JDM Visors

    I love J-Cups

  4. #4
    Member Array
    Join Date
    Jul 2007
    Location
    Behind the wheel of my car, cruising the hills of adelaide
    Car:
    ED6 Civic
    go to your local sprint/supercheap, and grab some exhaust putty.

    then close to the end of the tip of your exhaust, mold a little lump all the way around, with roughly a 2inch opening. make sure its a smooth lump on the side facing outwards, and a steep angle on the side closest to the rest of your exhaust system.

    let it dry, and it should do the job. worked fairly well for my 4 inch cannon.
    Current Performance Modifications to ED6:
    not telling, but it involves a semi-quad carb setup, and lots and lots of compression.

  5. #5
    Member Array
    Join Date
    Oct 2004
    Location
    Sydney - Cabramatta/Liver
    Car:
    Jazz EVO IX
    don't bother even the canon ones fall off.
    I made one and it worked well, but then it fell off one day and i couldn't be bother making another one.

    easiler just to get another muffler
    Evo IX - THE FINAL EVOLUTION

  6. #6
    Member Array
    Join Date
    Dec 2004
    Location
    Melb
    Car:
    EG3
    there is no need to get another muffler. These silencers are available from some exhaust shops in 3"...or possibly ebay. You may need to drill a small hole in the canon's tip to fit it.
    Yes they sometimes come off, but check the mounting bolt regularly and should be fine.

  7. #7
    x2 for a new muffler man. if its too loud and u need a silencer get rid of it. better option for the long run

  8. #8
    If you really want to make one try this…

    1. Cut a disk out of sheet metal the size of your exhaust tip
    2. Cut a hole in the disk you have just made
    3. Place tube in back of hole and weld
    4. Get a thin strip of sheet and turn it into a cylinder
    5. Weld cylinder onto front of disk
    6. Drill hole in the outer cylinder to attach to car
    7. Rivet the new silencer to the muffler
    Quote Originally Posted by duped View Post
    what's a mugen?
    Quote Originally Posted by Nikki View Post
    ill wash urs u wash mine?

  9. #9
    Quote Originally Posted by 95civic View Post
    If you really want to make one try this…

    1. Cut a disk out of sheet metal the size of your exhaust tip
    2. Cut a hole in the disk you have just made
    3. Place tube in back of hole and weld
    4. Get a thin strip of sheet and turn it into a cylinder
    5. Weld cylinder onto front of disk
    6. Drill hole in the outer cylinder to attach to car
    7. Rivet the new silencer to the muffler
    or could make it slightly smaller, and drill holes on the side of cylinder and use screws to hold it in from the sides

    that way you can take it off whenever you like
    Who's your messiah now!

  10. #10
    Member Array
    Join Date
    Aug 2006
    Location
    murarrie
    Car:
    EG Si Hatchie
    silenced cannons sound like shit!!! farty and plain gay!!!!!

    my vote would be another hotdog in your system. $50 fitted from an exhaust shop. save your time money and hassle and stupid noise silencers make and keep the straight flowing pipe for more power. or get a triflow hotdog for even quieter but less power.
    Is this the end of my car modding days? Buying a house says so...

  11. #11
    Member Array
    Join Date
    Jul 2007
    Location
    JDMD15B
    Car:
    14EGs/8EDs/3EKs
    You can still get done even with a silencer.. Only way you won't get done is if the silencer is welded on rather then just 'screwed' on.

  12. #12
    Member Array
    Join Date
    Oct 2006
    Location
    Hunter Valley NSW
    Car:
    lownslowsedan
    ^^^ this


    so really a silcencer is pointless
    to see all of my build, checkout


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.