Results 1 to 8 of 8
  1. #1
    Member Array
    Join Date
    Oct 2004
    Location
    Sydney - Cabramatta/Liver
    Car:
    Jazz EVO IX

    knock sensor help

    Hi guys having problems removing my knock sensor from my b16a.
    I've put a No. 27 socket on the sensor but it doesn't go on for some reason. It seems like the metal coolant pipe on the block is in the way, anyone got any ideas? It seems to make the socket too thick. Tried it on another b16 block but its not in the way

    I've had it on the hoist but can't get to it from top or bottom
    Last edited by Limbo; 18-05-2009 at 12:45 AM.
    Evo IX - THE FINAL EVOLUTION

  2. #2
    Account Disabled Array
    Join Date
    Sep 2004
    Location
    Sydney
    Car:
    CT9A
    need to remove the intake manifold.

  3. #3
    Member Array
    Join Date
    May 2006
    Location
    Brisbane
    Car:
    380GT,XTrailSTR
    try it with an open spanner + rubber mallet. if your buddies at the workshop don't have it in that size their like $20 at supercheap
    Quote Originally Posted by Slow96GSR
    If 1 person has had bad luck with a product don’t condemn it until you yourself have tested it. Now if 10 pros have tried it and it sucked then I would trust their opinion.

  4. #4
    Member Array
    Join Date
    Oct 2004
    Location
    Sydney - Cabramatta/Liver
    Car:
    Jazz EVO IX
    yeah its getting to the knock sensor, just enough room only just to put the socket on it. No room for a spanner in there at all

    Fatboyz - i was hoping not to do that.
    Evo IX - THE FINAL EVOLUTION

  5. #5
    Account Disabled Array
    Join Date
    Sep 2004
    Location
    Sydney
    Car:
    CT9A
    its the only way.

  6. #6
    Member Array
    Join Date
    Oct 2004
    Location
    Sydney - Cabramatta/Liver
    Car:
    Jazz EVO IX
    bugger cos we tried it on a block that out of the car and it seems to fit. (!@#*@)($&#)@!$
    Evo IX - THE FINAL EVOLUTION

  7. #7
    go buy your self a deep 27 socket....it works for me
    JDMYard Eg civic lsvtec 1.04:1 WAKEFIELD PARK
    Bel Garage Dc2r/Neptune ecu
    SUPERLAP 2010 clubsprint FF na winner
    1.54.81 street tyre

  8. #8
    Member Array
    Join Date
    Oct 2004
    Location
    Sydney - Cabramatta/Liver
    Car:
    Jazz EVO IX
    Quote Originally Posted by jdmTYPE R View Post
    go buy your self a deep 27 socket....it works for me

    yeah had that it wouldn't fit on. It fit on the block that was out of the car
    Evo IX - THE FINAL EVOLUTION

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.