What will remove these scuff marks?

[VBOMB]

I've already used a polish on it 3-4 times Selling it that's why I want to fix it up.



It's a pretty light mark too not a deep scratch you'd catch your nail in.

[dvsx]

try meguairs scratch x

[duzy]

if you can catch your nail in it, its probably too deep, your going to need to get it resprayed.

but to minimise it, i used some swirl/scratch remover and it will probably get most of the light grey shit, but the rash is still going to be there.

[VBOMB]

try meguairs scratch x

I've heard thats a fairly popular option

EDIT: Also if I get the Meguiars Scratch X 'cream' does the Meguiars pad come with it?

[Nepolian]

I've heard thats a fairly popular option

EDIT: Also if I get the Meguiars Scratch X 'cream' does the Meguiars pad come with it?

Scratch X x 2,3,4,5,6,7 etc......If this doesn't get it off you may need to see a panel beater

Pads cost about 3-4 bucks. You can use a microfibre cloth (clean) if you have one!

[zero_1234567890]

If the scuff is only clear coat just try and buff it back so the scuff is not as visible, dont do it to the colour coat though otherwise youll have to respray clear coat

[dvsx]

I've heard thats a fairly popular option

EDIT: Also if I get the Meguiars Scratch X 'cream' does the Meguiars pad come with it?

doesnt come with the pad. do as nepolian said

[VBOMB]

Thanks guys, I'll grab it this weekend and try give it a few coats over a couple of days and hope for the best Will post back with my results even if it doesn't get rid of it completely

[dvsx]

you've got to use some force btw. good luck

[VBOMB]

Will do Thanks! Hopefully grab the 2 pads/Scratch X on saturday (for future use too anyway)

[Red_EG4]

Will do Thanks! Hopefully grab the 2 pads/Scratch X on saturday (for future use too anyway)

I use the applicator pads for applicating
and terry towels for removing.

The Z is pretty low? post a full pic please

[VBOMB]

Yeah hopefully they sell the pads too I have a microfiber cloth at home though for the final wipe
Here's a full picture of the Z - it's stock though