Page 1 of 2 12 LastLast
Results 1 to 12 of 13
  1. #1
    Member Array
    Join Date
    Sep 2006
    Location
    Out in Nature
    Car:
    91 eg5 b16a

    Cool DIY: Gettin' Ya Gaps Right!

    Disclaimer: The following is provided as a GUIDE ONLY, and neither myself nor Ozhonda take any responsibility for the outcomes of someone else doing the following. You follow these steps at your own risk!

    This DIY is an addition to the DIY I did on gettin' ya Lip Straight - http://www.ozhonda.com/forum/showthread.php?t=102747

    Aim: To get the gaps between ya front and rear bumpers correct!

    Required: 1 or 2 pieces of wood and a jack.

    Do U have a front or rear bumper that moves up and down and around?

    Do U have an ugly gap between your bumper and chassis?

    Or just a bumper that simply is not sitting right?

    If you answered Yes to any of the above questions then this Mods 4 U!!

    Having all the gaps correct around the car makes a difference.When someone runs there eye over the car,it won't catch on an ugly gap.It makes the car look neat,tidy and clean.

    First the gap between the rear bumper and chassis:

    (note,I had already done it by this stage and done it again to do a DIY,so no ugly gap there)

    Jack the car up:



    If you are doing this on concrete then 1 piece of wood,the correct length will work.



    Now,you want to wedge the piece of wood up under the bumper and on this bracket:



    Which is right behind here:



    Hold it in place and lower the jack:





    Put some weight on it and the bracket will push and bend up on the bumper and hold it in place.Wow,look at all that Love and Light pouring into me



    Just behind the rear wheel is bolt from the bumper to the chassis.Over the years this bracket sags.You can get a piece of wood and push this up to bend the bracket and bring that ugly gap together:





    Do this on both sides,offcoarse.

    Works a Dream!







    For the Front.Make sure you have those 2 clips on,holding the top of the bumper in place.If they have gone missing,as usual,just use cable ties:





    There is the same bolt/bracket for the front:



    Get a piece of wood and push that sucker up!

    If you have chicken arms you can use the wedgeing the wood and lowering the jack method.



    O,yes,beautiful:










    Make sure you have removed that ugly piece of rubber at the front between ya bonnet and grill too.Much cleaner without it.


    So there ya go,a simple DIY to make your car look clean as!
    Last edited by beeza; 23-08-2009 at 11:30 AM.

  2. #2
    Member Array
    Join Date
    Nov 2007
    Location
    Sydney
    Car:
    EP3R>AH>EK>DC2
    Good stuff Brett.

    But you also forgot the disclaimer.
    SPAMMAPS
    Carburettor|Nation

    that mikey G guy is the biggest shit talker ive ever met..
    in the space of 15minutes he sold two sets of wheels. claims a guy under the username DNT-CRY bought them!

  3. #3
    Member Array
    Join Date
    Sep 2006
    Location
    Out in Nature
    Car:
    91 eg5 b16a
    Thanks SHO,Fixed!

  4. #4
    Member Array
    Join Date
    Mar 2008
    Location
    SYD-SG-JPN-MY
    + rep points,
    very awsome diy for such a small yet, important thing (to some of us)

  5. #5
    Member Array
    Join Date
    Sep 2006
    Location
    Out in Nature
    Car:
    91 eg5 b16a
    Thanks kcokla!

    I Happy you can see and understand what I mean.It really does make a nice difference.

    It's so simple...my gaps weren't bad but until I fixed them I didn't realse just how much of a difference it makes.

    Thanks again.

  6. #6
    Member Array
    Join Date
    Apr 2005
    Location
    Melbourne E-Side
    Car:
    EM1
    i had the sagging bit between fender/front bumper it was gay!
    but got fixed by a panel beater when i got it sprayed.

    nice work nonethless beeza

    whats ur plate mean
    "since we're both asian.. I'll look after you and chuck in King Springs with the wheels and tyres for $1050"

  7. #7
    Member Array
    Join Date
    Sep 2006
    Location
    Out in Nature
    Car:
    91 eg5 b16a
    Thanks mate.

    I just liked the numbers 52 when I choose it

    People probably think I'm 57 years old hehehe

  8. #8
    Member Array
    Join Date
    Nov 2007
    Location
    In the pit
    Car:
    A black one
    Well done beez man!!
    Anyone selling a black ek1 facelift Hood (OEM)?? PM ME


  9. #9
    Member Array
    Join Date
    Sep 2006
    Location
    Out in Nature
    Car:
    91 eg5 b16a
    Thanks Mate!!!


  10. #10
    nice rims.

  11. #11
    Member Array
    Join Date
    Sep 2006
    Location
    Out in Nature
    Car:
    91 eg5 b16a
    Thanks mate,I still Love em'!

  12. #12
    Member Array
    Join Date
    Oct 2006
    Location
    Melb
    Car:
    P1.5 460F/350R
    that shlt is tight!
    S P A M | W O R K S
    With our special rotational tires, it will allow you to drive very fast. - JK Tyre

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.