Page 1 of 2 12 LastLast
Results 1 to 12 of 23
  1. #1
    ...ZzzzZzzz Array
    Join Date
    Aug 2005
    Car:
    Pushbike...

    Post NSW - Vehicle Legislations / RTA Guidelines

    Helpful info on NSW rules and regulations for things like ride height, increased wheel size, motor modifications, tints, etc etc.

    NSW Vehicle Legislation


    RTA Standards
    -------------------------------------------

    FFFFffffuuuuuuux999

  2. #2
    Member Array
    Join Date
    Feb 2011
    Location
    Moore Park - Sydney
    Car:
    FD1-RR 2.7
    This is interesting ?? I had a tyre monkey try and tell me a near new tyre was illegal cause it was almost missing the groove on the out side of the the tyre.

    Now if you read the RTA tyre guidelines, it almost reads as thou you could have upto 25% of the tread missing, certainly wouldn't want to test that theory !! lol

    RTA states - For all other vehicles, a tyre must have a tread pattern around its circumference that is at least 1.5mm
    deep across at least 75% of the tyre surface that contacts the road.

  3. #3
    Member Array
    Join Date
    Dec 2011
    Location
    Sydney, Aus
    Car:
    '93 EG Si
    http://www.rms.nsw.gov.au/registrati...s/vsi/vsi6.pdf

    Update on VSI 6 on the 8th on November 2013.

    26

    Reinforcement of the chassis (eg boxing chassis or fitting ¾ chassis/body reinforcing
    kits).
    Example requiring certification:

    Fitting additional structural members to a chassis.
    Example not requiring certification:

    Fitting a strut tower brace.


    A strut tower brace is a member, a structural member!
    Currently officially unofficially Ozhonda's vinyl sticker distributor:
    1 Small 150 x 29mm: $6 posted
    1 Large 250 x 43mm: $8 posted


    IG: thenameis3k9

  4. #4
    Member Array
    Join Date
    Jan 2005
    Location
    Toronto, Ontario
    Car:
    Corolla Spec S
    Example not requiring certification:

    Fitting a strut tower brace.


    read properly
    peteju captures, like us on facebook..

  5. #5
    Member Array
    Join Date
    Dec 2011
    Location
    Sydney, Aus
    Car:
    '93 EG Si
    Quote Originally Posted by lilthug View Post
    Example not requiring certification:

    Fitting a strut tower brace.



    read properly
    Huh, didn't you read my last sentence?
    Currently officially unofficially Ozhonda's vinyl sticker distributor:
    1 Small 150 x 29mm: $6 posted
    1 Large 250 x 43mm: $8 posted


    IG: thenameis3k9

  6. #6
    Is the car compromised without it or with it altered? Not really imo; thus not structural member?

  7. #7
    Quote Originally Posted by Chernoby1 View Post
    Is the car compromised without it or with it altered? Not really imo; thus not structural member?
    I think he means the law states it isn't - but technically it CAN compromise the cars chassis. He must be an engineering student and has conflicting thoughts in his head lol.

  8. #8
    Member Array
    Join Date
    Dec 2011
    Location
    Sydney, Aus
    Car:
    '93 EG Si
    Quote Originally Posted by bennjamin View Post
    I think he means the law states it isn't - but technically it CAN compromise the cars chassis. He must be an engineering student and has conflicting thoughts in his head lol.
    I am just mechanically minded! =P
    Nup, not an engineering student. Hopefully I will be one next year.
    Currently officially unofficially Ozhonda's vinyl sticker distributor:
    1 Small 150 x 29mm: $6 posted
    1 Large 250 x 43mm: $8 posted


    IG: thenameis3k9

  9. #9
    Did a bit of researching into this recently and thought I would share some useful links I found.

    As above the Vehicle Standards Information (VSI) No.6 - Light Vehicle Modifications was updated in November 2013. The VSI is more or less a guideline and should be read in conjunction with the legal document - Vehicle Safety Compliance Certification Scheme Declaration of Modification or Class of Modification Order 2013 (the Order) which contains a full list of modifications that require certification.

    The main changes to Light Vehicle Modifications since November 2013 are:

    - Replacement engines may have 20% greater capacity (up from 15%);
    - Modified engines, including electric/hybrid, may achieve 20% higher power output;
    - An option for alternative emission testing; and
    - 7% increase in wheel/tyre size.


    Here is some of the information found in VSI 06:

    Significant modifications requiring certification

    ENGINE
    An engine that is not of an original family of engine for the series of models, or any
    engine more than 20% larger than the largest original optional engine for that series.

    Examples requiring certification:
    • Replacement of 2.0 litre Honda engine with 2.0 litre Mitsubishi engine.
    •Replacement of 2.0 litre engine with an engine capacity greater than 2.4 litres.

    Example not requiring certification:
    •Replacement of a 2.0 litre engine with an engine of 2.4 litres capacity or less and from the same vehicle series.


    Fitting of turbochargers or superchargers not originally offered by the engine or vehicle
    manufacturer, or increasing the original power output by more than 20%.

    Examples requiring certification:
    •Fitting a turbocharger/supercharger to any vehicle of a make and model not offered
    with a turbocharger/supercharger by the manufacturer.
    •Modifications to a vehicle with a power output of 100 kilowatts, which results in a
    power output of greater than 120 kilowatts.


    I also found this interesting FAQ about roll cages:

    Can roll cages be used in vehicles as long as they are designed and constructed properly?

    Roll cages can be used in vehicles provided the installation meets the applicable vehicle standards. Installing a roll cage has the potential to affect one or more Australian Design Rules (ADRs), in which case certification will be required. The relevant standard is the requirement in Clause 21 of Schedule 2 of the Regulation that everything in a vehicle’s construction and operation must not pose a danger to any person. Four-point roll cages can still meet this requirement, however six-point roll cages cannot because the configuration of a six-point roll cage creates a rigid item
    directly in the head-strike area and obstructs the driver’s vision through the windscreen and adjacent side windows. A six-point roll cage may be installed in a vehicle if the front part is removed when the vehicle is used on a road or road-related area. Guidance on the fitting of roll cages can be found in Section LK of VSB No.14.


    More info can be found at:
    VSI No.6 http://www.rms.nsw.gov.au/registrati...s/vsi/vsi6.pdf
    VSCCS FAQ http://www.rms.nsw.gov.au/registrati...vsccs_faqs.pdf
    Declaration of Modification or Class of Modification Order 2013 (Pg.5-8) http://www.gazette.legislation.nsw.g...3_2013-151.pdf

  10. #10
    Can't find anything about headlight tinting.
    Want to add some SPI vision tints to my civics headlights, they are like a flyscreen in design so some parts are tinted some are not.



  11. #11
    you would probably have to refer to the relevant ADR
    http://www.infrastructure.gov.au/roa...dr_online.aspx



    AUSTRALIAN DESIGN RULES
    Any modification to a vehicle (whether or not listed in the Order) has the potential to affect one or more ADRs. Unless exempted by RMS (or ADRs do not apply to that vehicle), any modification that affects an applicable ADR will require certification; for example, a pole-mounted information technology (IT) screen is likely to affect one or more ADRs, and if this is the case, a VSCCS certificate will be required for the modification.

  12. #12
    Gone through all of the ones regarding headlights or front lighting.
    Could not find anything about tints.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.