+ Reply to Thread
Page 4 of 5 FirstFirst 1 2 3 4 5 LastLast
Results 37 to 48 of 53
  1. #37
    Newcomer azn_k3nt is an unknown quantity at this point
    Join Date
    Feb 2008
    Location
    South East Melbourne :)
    Car:
    '11 Euro CU2
    OTR or MJ for service in Westall/Springvale area for me...I'm currently running on motul from OTR but going to give martini oil a chance. Major service is coming up in the next 15,000km for me and got quoted $300 but really depends on what really get done...

  2. #38
    OzHonda Trader stndrd has an exceptional understanding stndrd has an exceptional understanding stndrd has an exceptional understanding stndrd has an exceptional understanding stndrd has an exceptional understanding stndrd has an exceptional understanding stndrd has an exceptional understanding stndrd has an exceptional understanding stndrd has an exceptional understanding stndrd has an exceptional understanding stndrd has an exceptional understanding
    Join Date
    Sep 2008
    Location
    Melbourne
    Car:
    Kermit K20A
    If you need servicing done, I can arrange a time to come out onsite after hours or on a weekend
    Sleeping Performance & Mechanical Repairs: Balance, Feedback, Response
    Ph: +61412 785 187 Address: 79/22 Dunn Cresent, Dandenong VIC 3175
    Email: sleepingperformancehq@gmail.com
    Facebook: http://www.facebook.com/sleepingperformancemr

  3. #39
    Member Fredoops has an exceptional understanding Fredoops has an exceptional understanding Fredoops has an exceptional understanding Fredoops has an exceptional understanding Fredoops has an exceptional understanding Fredoops has an exceptional understanding Fredoops has an exceptional understanding Fredoops has an exceptional understanding Fredoops has an exceptional understanding Fredoops has an exceptional understanding Fredoops has an exceptional understanding
    Join Date
    Oct 2010
    Location
    Melb
    Car:
    '03 Euro [CL9]
    Quote Originally Posted by stndrd View Post
    If you need servicing done, I can arrange a time to come out onsite after hours or on a weekend
    Had mine done at Sleeping, highly recommended!
    03 CL9 5AT
    Comptech Icebox|Ralco RZ pulleys|K&N filter|DC Header|R/T 250cell Cat|Comptech RSB|Cusco TowerBar & Lower Strut Bar|Pivot Raizen|Magnefine ATF Filter|Redline D4 ATF|Redline 5w30

  4. #40
    Member ChaosMaster is a splendid one to behold ChaosMaster is a splendid one to behold ChaosMaster is a splendid one to behold ChaosMaster is a splendid one to behold ChaosMaster is a splendid one to behold ChaosMaster is a splendid one to behold ChaosMaster is a splendid one to behold
    Join Date
    Feb 2012
    Location
    Melbourne
    Car:
    Accord Euro CL9
    Asked Astoria Honda a while back for a rough estimate of cost during my 20k km service. ~$350 for minor and ~$500 for major. Been servicing my car myself ever since.

  5. #41
    Newcomer by-life is an unknown quantity at this point
    Join Date
    Nov 2008
    Location
    Melbourne
    Car:
    Euro CL9
    Quote Originally Posted by 05accordeuro View Post
    look up http://www.fixedpricecarservice.com.au

    thats where I organise my services
    It is good resource:

    Called one mechanic, quote over than the website.

  6. #42
    I got a $460 quote for a 40K km service? Reasonable?

  7. #43
    Member Fredoops has an exceptional understanding Fredoops has an exceptional understanding Fredoops has an exceptional understanding Fredoops has an exceptional understanding Fredoops has an exceptional understanding Fredoops has an exceptional understanding Fredoops has an exceptional understanding Fredoops has an exceptional understanding Fredoops has an exceptional understanding Fredoops has an exceptional understanding Fredoops has an exceptional understanding
    Join Date
    Oct 2010
    Location
    Melb
    Car:
    '03 Euro [CL9]
    Quote Originally Posted by cend0l View Post
    I got a $460 quote for a 40K km service? Reasonable?
    no?

    What is needed to be done?
    03 CL9 5AT
    Comptech Icebox|Ralco RZ pulleys|K&N filter|DC Header|R/T 250cell Cat|Comptech RSB|Cusco TowerBar & Lower Strut Bar|Pivot Raizen|Magnefine ATF Filter|Redline D4 ATF|Redline 5w30

  8. #44
    Quote Originally Posted by Fredoops View Post
    no?

    What is needed to be done?
    The standard major 40000k service..valve clearance and all that crap

  9. #45
    Member Fredoops has an exceptional understanding Fredoops has an exceptional understanding Fredoops has an exceptional understanding Fredoops has an exceptional understanding Fredoops has an exceptional understanding Fredoops has an exceptional understanding Fredoops has an exceptional understanding Fredoops has an exceptional understanding Fredoops has an exceptional understanding Fredoops has an exceptional understanding Fredoops has an exceptional understanding
    Join Date
    Oct 2010
    Location
    Melb
    Car:
    '03 Euro [CL9]
    Job details
    Make: Honda
    Carline: Accord 2.4 Euro Auto 08-
    Service: 40K 24Mth Service
    Est Time: 3 Hour(s)

    Job instructions
    Replace engine oil
    Replace engine oil filter.
    Replace dust and pollen filter

    Inspect valve clearances.
    Inspect all drive belts.
    Inspect front and rear brakes.
    Inspect parking brake adjustment.
    Inspect headlight alignment.
    Check all fluid levels and condition of fluid.
    Check headlight,tail,indicator,reverse & brake light operation.
    Inspect parking brake adjustment.
    Inspect headlight alignment.
    Check all fluid levels and condition of fluid.
    Check headlight,tail,indicator,reverse & brake light operation.
    Visually inspect tie rod ends, steering gearbox and boots.
    Visually inspect suspension components.
    Visually inspect driveshaft boots.
    Visually inspect brake hoses & lines including abs.
    Visually inspect exhaust system.
    Visually inspect fuel tank, lines and connections.
    Test drive vehicle (check all systems and controls).
    Inspect tyre condition and rotate tyres.

    Parts
    Oil filter c - 1 piece(s)
    Element filt - 1 piece(s)
    Washerdrain - 1 piece(s)
    Engine oil - 4.2 litres
    That's what's needed to be done.

    Note the thing says INSPECT valve clearance, doesn't mean they'll do it.
    You'd be suprised how many times workshop don't do the clearance and charge you anyway

    I recken it's no more than $400 worth of work from a dealer, because valve clearance is only a $120 job (I got it done separately), the rest is just a normal service plus an air filter (which they might not even replace), which dealers should not charge more than $250

    Ps: Hondas gonna try to rip you blind for the air filter, up to $75 iirc, I got an honda OEM airfilter shipped from the states via eBay for less than $30...
    Last edited by Fredoops; 13-12-2012 at 12:53 AM.
    03 CL9 5AT
    Comptech Icebox|Ralco RZ pulleys|K&N filter|DC Header|R/T 250cell Cat|Comptech RSB|Cusco TowerBar & Lower Strut Bar|Pivot Raizen|Magnefine ATF Filter|Redline D4 ATF|Redline 5w30

  10. #46
    OzHonda Trader stndrd has an exceptional understanding stndrd has an exceptional understanding stndrd has an exceptional understanding stndrd has an exceptional understanding stndrd has an exceptional understanding stndrd has an exceptional understanding stndrd has an exceptional understanding stndrd has an exceptional understanding stndrd has an exceptional understanding stndrd has an exceptional understanding stndrd has an exceptional understanding
    Join Date
    Sep 2008
    Location
    Melbourne
    Car:
    Kermit K20A
    At 40,000km the valve clearances will be fine (unless you can noticeably hear a tappet noise).

    If you are in Melbourne and are after a competitive alternative, drop me a PM
    Sleeping Performance & Mechanical Repairs: Balance, Feedback, Response
    Ph: +61412 785 187 Address: 79/22 Dunn Cresent, Dandenong VIC 3175
    Email: sleepingperformancehq@gmail.com
    Facebook: http://www.facebook.com/sleepingperformancemr

  11. #47
    Member Fredoops has an exceptional understanding Fredoops has an exceptional understanding Fredoops has an exceptional understanding Fredoops has an exceptional understanding Fredoops has an exceptional understanding Fredoops has an exceptional understanding Fredoops has an exceptional understanding Fredoops has an exceptional understanding Fredoops has an exceptional understanding Fredoops has an exceptional understanding Fredoops has an exceptional understanding
    Join Date
    Oct 2010
    Location
    Melb
    Car:
    '03 Euro [CL9]
    Quote Originally Posted by stndrd View Post
    At 40,000km the valve clearances will be fine (unless you can noticeably hear a tappet noise).

    If you are in Melbourne and are after a competitive alternative, drop me a PM
    Nothing beats actually seeing the wok being done in front of you.
    03 CL9 5AT
    Comptech Icebox|Ralco RZ pulleys|K&N filter|DC Header|R/T 250cell Cat|Comptech RSB|Cusco TowerBar & Lower Strut Bar|Pivot Raizen|Magnefine ATF Filter|Redline D4 ATF|Redline 5w30

  12. #48
    Member buddah51au Knows a bit of info here and there buddah51au Knows a bit of info here and there
    Join Date
    Jun 2006
    Location
    Fraser Coast
    Car:
    MY12 CU2 Auto
    Quote Originally Posted by stndrd View Post
    At 40,000km the valve clearances will be fine (unless you can noticeably hear a tappet noise).

    If you are in Melbourne and are after a competitive alternative, drop me a PM
    There is no tappet noise if they are tight

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.