Results 1 to 10 of 10
  1. #1
    Member Array
    Join Date
    Nov 2008
    Location
    2766 NSW
    Car:
    C34/RE7/ED6/FN2

    Longer Bolt Engine Stand to mount D16A8

    hi guys,

    I bought an engine stand from super cheap auto..which is the brand SCA.

    I wanted to bolt the D16 motor to it, but the Gearbox bolt to the Motor is not long enough to screw through from one side to the motor.

    I been looking for longer screws than the normal bolt with the same size, but super cheap, repco, autobarn and bunnings dont have a longer bolt the size i am after would be M12x1.25 100mm,

    because the standard gearbox bolt to the motor is M12x1.25 75mm

    can anyone help me, or you guys found a different way to put the motor to the engine stand.

    let me know guys

    cheers

  2. #2
    Member Array
    Join Date
    Nov 2008
    Location
    2766 NSW
    Car:
    C34/RE7/ED6/FN2
    can anyone help me? or give suggestions please =)

  3. #3
    Member Array
    Join Date
    Apr 2009
    Location
    QLD
    Car:
    ED Sedan
    are you talking about the bolt that is bolted through the block into the transmission?
    so there is just a hole in that part of the block, its not threaded?

  4. #4
    Member Array
    Join Date
    Apr 2009
    Location
    QLD
    Car:
    ED Sedan
    this one?


  5. #5
    Member Array
    Join Date
    Oct 2006
    Location
    Melb
    Car:
    P1.5 460F/350R
    yea should be those ones mark.
    op: use engine mount bolts.

  6. #6
    Member Array
    Join Date
    Jul 2006
    Location
    JDM PARTS BRISBANE
    Car:
    EURO LUX
    if not go to nut and bolt shop

  7. #7
    Member Array
    Join Date
    Apr 2009
    Location
    QLD
    Car:
    ED Sedan
    just go to bunnings and get a galvanised roof truss bolt. they come in longer lengths and are cheap as shit. like a few dollars

  8. #8
    Member Array
    Join Date
    Nov 2009
    Location
    Brisbane
    Car:
    Gutted EF8
    Or wreckers for some large Honda suspension bolts
    Like the large long bolt for the front shock fork

  9. #9
    Member Array
    Join Date
    Oct 2006
    Location
    Melb
    Car:
    P1.5 460F/350R
    Quote Originally Posted by cotties View Post
    Or wreckers for some large Honda suspension bolts
    Like the large long bolt for the front shock fork
    im pretty sure sussy bolts arent big enough for tranny hole.
    analogy: my asian penis + sasha grey's a-hole.

  10. #10
    Member Array
    Join Date
    Nov 2008
    Location
    2766 NSW
    Car:
    C34/RE7/ED6/FN2
    thanks guys.. bought a longer bolt from an engineering place at parra.. engine is now mounted to the engine stand.. cheers guys..=)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.