Results 1 to 6 of 6
  1. #1

    Bent EK Front lip

    Hey!

    I recently bought a 2nd hand front lip for EK and it's slightly bent outwards on both sides.. what's the best way to get the lip back into place?

    ANY HELP WILL BE TOTALLY AWESOME =]

  2. #2
    Member Array
    Join Date
    Sep 2008
    Location
    B18C You wouldn't
    Car:
    Understand
    heat it up with a hair dryer/ heat gun at the point its bent from and bend it back the other way.

    ~King Of Spam~

  3. #3
    Member Array
    Join Date
    Sep 2008
    Location
    B18C You wouldn't
    Car:
    Understand
    Forgot to add. Is the lip PP plastic or what? depending on what the lip is made from you might not be able to bend it.

    Say if its Hard/soft plastic, fibre glass or carbon fibre.

    ~King Of Spam~

  4. #4
    Hey! Thanks for the info.. it's polyurethane. Will a hairdryer be hot enough? I'm planning to bend it back a bit and then respray and all..
    It's hard plastic but i think it can be moulded a bit..

  5. #5
    Member Array
    Join Date
    Oct 2011
    Location
    North Brisbane
    Car:
    EK Civic
    I'd go to bunnings and get a heat gun, take too long with a hair dryer.

  6. #6
    Member Array
    Join Date
    Sep 2008
    Location
    B18C You wouldn't
    Car:
    Understand
    POly is very hard to bend when you heat it. Actaully i dont even think it will bend. If you're gunna spray it just tell the shop to fix it. and they'l do their best. Get then to fit it for you too so less headache for you

    ~King Of Spam~

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.