Results 1 to 6 of 6
  1. #1
    Newcomer Array
    Join Date
    Aug 2011
    Location
    NSW
    Car:
    Civic em1

    jdm b18c itr engine into em1 !

    would putting a jdm B18c ITR engine into my em1 be a straight bolt on ????
    if not what will be needed ?

    can anyone guide me through what needs to be done tyyy

  2. #2
    Green block gangster Array
    Join Date
    May 2004
    Car:
    twin GX160's
    engine mounts
    wiring looms
    engine mount brackets

  3. #3
    Member Array
    Join Date
    Jan 2009
    Location
    Melb/Syd
    Car:
    CP2 / EG5
    What needs to be done :

    Get cash
    Buy half cut
    Take half cut to mechanic or at home
    remove old engine out of car and half cut
    install engine from half cut into car
    Test
    Take to mechanic to blue slip
    Report to RTA

    GGKKTHXBYE...WELCOME ABOURD !!

    But in case you don't know hwo to google took me 5 secs to find something online :

    http://www.clubcivic.com/board/showthread.php?t=75435

    http://www.google.com.au/url?q=http:...-VrxoTHluw9jeQ

    http://honda-tech.com/showthread.php?t=2354020
    Last edited by Tai; 22-11-2011 at 07:09 PM.

  4. #4
    Member Array
    Join Date
    Jul 2006
    Location
    JDM PARTS BRISBANE
    Car:
    EURO LUX
    you will only to get a long block b18cr motor, as you can use everything from your em1
    pretty much take out your motor and reuse your engine loom and use the rest of your b16a parts
    all you will need is a obd2a to obd2b conversion harness to run a b18cr ecu or suitable aftermarket ecu
    make sure you do clutch, bearings, gaskets, timing belt, etc at the same time

  5. #5
    Newcomer Array
    Join Date
    Aug 2011
    Location
    NSW
    Car:
    Civic em1
    thanks for quick ass replies

  6. #6
    you are welcome abourd ozhonda

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.