Page 3 of 3 FirstFirst 123
Results 25 to 28 of 28

Thread: RSB for CU2

  1. #25
    Member Array
    Join Date
    Mar 2009
    Location
    melbourne
    Car:
    cu2typesmodulo
    Quote Originally Posted by pitiek View Post
    Are you using the stock endlinks?
    I will attempt a DIY sway bar install this time, so is this exhaust flange issue DIYable for a newbie???
    if you are using the stock exhaust then that should be fine as it is a single straight unit as opposed to the fujitsubo exhaust I have on my car which comes in sections and are bolted at flange points.

    if you get the progress rsb, there is a bit of drilling that needs to be done as the screw fittings are 10mm as opposed to 8mm on the stock car. In general it should be a simple diy as mine was a little bit tricky i had a shop do it for me.

  2. #26

    Progress 22mm, Ultra Racing 19mm - any others

    1: Progress adjustable rear sway bar at 22mm (8mm stock holes require drilling to fit 100m bolts)
    2: Ultra Racing Rear Sway bar at 19mm

    Any other vendors that make one for CU2?
    Any Australian or Japanese companies?
    7500rpm in 2012 K24Z3

  3. #27
    Member Array
    Join Date
    Oct 2010
    Location
    Melb
    Car:
    '03 Euro [CL9]
    CT engineering?
    2003 CL9 5AT *ECU REFLASHED*
    CT-E Icebox|Ralco RZ pulleys|K&N filter|DC Header|250cell Cat|Cusco Tower & H Brace| H.Drive Coilovers | Rays RE30 18x8.5 | S/S Brakelines | Rigid Collars

  4. #28
    Quote Originally Posted by Fredoops View Post
    CT engineering?
    They don't have one (that can be accessed from the website).


    Looks like they haven't updated their website since 2013, though....
    7500rpm in 2012 K24Z3

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.