Page 2 of 4 FirstFirst 1234 LastLast
Results 13 to 24 of 45

Thread: Full Respray

  1. #13
    Member Array
    Join Date
    Jun 2007
    Location
    Victoria
    Car:
    Civic EG4 GLi
    Quote Originally Posted by Winter View Post
    on the other hand with acrylic paint if you make a mistake i.e paint and it's drip shows you can use sand paper to fix it before using the final clear coat
    why cant this be done with 2pak?

  2. #14
    Member Array
    Join Date
    Oct 2006
    Location
    Melb
    Car:
    P1.5 460F/350R
    Quote Originally Posted by Winter View Post
    i recommend you to use acrylic paint rather than 2pak

    if you make a mistake using 2pak you can't really fix it cos you paint once and plus you need an oven spray booth

    on the other hand with acrylic paint if you make a mistake i.e paint and it's drip shows you can use sand paper to fix it before using the final clear coat

    also acrylic paint is cheaper
    only for DIYs.

    always choose urethane(2pack) paint whenever possible.
    alot more durable than acrylic. you will be more satisfied in the long run.

    +1 pm charliebrown for tupac paint job in spraybooth.

    Quote Originally Posted by Red_EG4 View Post
    why cant this be done with 2pak?
    harder to sand down and polish.
    not saying it cant be done, just harder.
    S P A M | W O R K S
    With our special rotational tires, it will allow you to drive very fast. - JK Tyre

  3. #15
    Member Array
    Join Date
    Oct 2006
    Location
    Hunter Valley NSW
    Car:
    lownslowsedan
    Illegal to use tupac outside of a booth.

    Just saiyan
    to see all of my build, checkout


  4. #16
    Newcomer Array
    Join Date
    Jun 2010
    Location
    Melbourne
    Car:
    S2K AP1
    Great info so far. I have PM Charlie Brown already.
    Can anyone give me infomation of where to seek out advice and supplies for equipment, Paint etc specialiseing for Car resprays and DIY.
    Preferably Westside.

    Many thanks!

  5. #17
    Member Array
    Join Date
    Oct 2006
    Location
    Melb
    Car:
    P1.5 460F/350R
    Quote Originally Posted by seancrx9 View Post
    Great info so far. I have PM Charlie Brown already.
    Can anyone give me infomation of where to seek out advice and supplies for equipment, Paint etc specialiseing for Car resprays and DIY.
    Preferably Westside.

    Many thanks!
    for air compressor if you havent got one,

    should use 100+ltr tank, 3+ hp at least so you dont overwork the pump
    invest in diesel/petrol pumps, you wont burn the motor quick.

    electric pump usually burn out quick because your house power point does not have correct amp rate.
    these electric pumps usually need 12-15amps, regular power point in homes usually have 10amps.
    S P A M | W O R K S
    With our special rotational tires, it will allow you to drive very fast. - JK Tyre

  6. #18
    Quote Originally Posted by mocchi View Post
    for air compressor if you havent got one,

    should use 100+ltr tank, 3+ hp at least so you dont overwork the pump
    invest in diesel/petrol pumps, you wont burn the motor quick.

    electric pump usually burn out quick because your house power point does not have correct amp rate.
    these electric pumps usually need 12-15amps, regular power point in homes usually have 10amps.
    in other words, if you don't have all that's mentioned, PM charliebrown

  7. #19
    Member Array
    Join Date
    Oct 2006
    Location
    Melb
    Car:
    P1.5 460F/350R
    did a spray job few months back with charliebrown, top bloke gave me real good service. painted my gear knob and gave it a quick polish too afterwards. in the end I was happy.
    S P A M | W O R K S
    With our special rotational tires, it will allow you to drive very fast. - JK Tyre

  8. #20
    Member Array
    Join Date
    Jan 2008
    Location
    Sydney
    Car:
    legtec @2psi
    1+ charliebrown also polished my knob free of charge

  9. #21
    Member Array
    Join Date
    Aug 2009
    Location
    Front yard
    Car:
    4WD 89 Concerto
    OEM parts whore

  10. #22
    if you use 2pac solid colour you can fix up fuk ups easliy 2pac is easy to spray
    DON'T GET RIPPED OFF DIY

  11. #23
    Member Array
    Join Date
    Jul 2007
    Location
    JDMD15B
    Car:
    14EGs/8EDs/3EKs
    2pac sprayin bullets since 1995
    JDM D15B - you wouldn't understand

    No K-SWAP ? No worries - Unfriend

  12. #24

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.