Results 1 to 4 of 4
  1. #1
    Newcomer Array
    Join Date
    Mar 2012
    Location
    Perth, Australia
    Car:
    95 EG4 B18C

    B18C2 4 wire O2 Sensor (which wire?)

    Hi guys,

    Installed my RMF Headers today and everything's good, I had to extend the O2 Sensor wires but when I chopped it off to solder I completely forgot to mark the 2 black wires

    Now I have no idea which is which. Tried searching but haven't really been able to find any info.

    I've attached photos so thanks in advance if you can tell me which one connects to what

    Click image for larger version. 

Name:	02.jpg 
Views:	89 
Size:	147.2 KB 
ID:	21680Click image for larger version. 

Name:	01.jpg 
Views:	81 
Size:	163.2 KB 
ID:	21681Click image for larger version. 

Name:	03.jpg 
Views:	83 
Size:	199.4 KB 
ID:	21682

  2. #2
    Member Array
    Join Date
    Nov 2010
    Location
    Some where in the world
    Car:
    b18c2+T Ej8
    you may mix up the black wires... if car dies after it is warm/10-30 seconds, that's the first thing to swap over and troubleshoot.. theres no way to tell one from the other by looking at them

  3. #3
    Member Array
    Join Date
    Apr 2007
    Location
    Sydney
    Car:
    91 ED9 CRX
    It doesn't matter which is which you can connect the black wires anyway and it will be fine.

  4. #4
    Newcomer Array
    Join Date
    Mar 2012
    Location
    Perth, Australia
    Car:
    95 EG4 B18C
    Thanks guys that's what I wanted to hear. I just got under the car and switched between the two and both turned off the warning light.

    Cheers!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.