Front splitter for the track

[tripleuse]

nice, will be making one on the weekend!

[FongPei]

I LOVE IT! Nice diy. i'm in the middle of making one now too! just want your opinion - do you think 5mm 5083 aluminium is strong enough for the mounts?

[FongPei]

hey mate! i'm halfway through making my splitter =] what do you think about using the bolt on spot for the reinforcement bar as the mounting position? can't seem to find anywhere on an ek to mount

[doosra]

Reviving old thread.. I recently built my splitter. Anyone have ideas on what I can use at under edges of the splitter at the front to protect it from the scraps?

[Kreston]

Reviving old thread.. I recently built my splitter. Anyone have ideas on what I can use at under edges of the splitter at the front to protect it from the scraps?

Show us a pic! Keen to see on an EP3!

[Alexx]

just let it scrape. Its a piece of wood lol

[doosra]

Looks shit when u let it scrap cause your get all fury wood bits on the edges.. problem solved

[Dyln.bxtr]

Great write up. Has anyone tried using aluminium sheet metal with some kind of lip like this one http://pages.ebay.com/link/?nav=item...d=221560187887
I'm thinking about buildin one for the ek to try and prevent the front end from lifting and getting too light around the 180kph mark.

[Dyln.bxtr]

Looks shit when u let it scrap cause your get all fury wood bits on the edges.. problem solved

What did you use?

[doosra]

Go Clark Rubber.. they have this pinchweld pvc strip u can buy

[Dyln.bxtr]

Nice. I'll have to check it out then