Here it's the original thread I started in the civic section... http://www.ozhonda.com/forum/showthr...22-Frankie-EG4 Here is the specs on the motor etc, for those who couldn't be bothered reading the other thread..... F22A1 Block Custom Aluminium 5.5Qty Sump Crankshaft Re-Grind Eagle Rods CP Pistons 85.5mm Block Guard 2mm Copper Head Gasket H22A4 Head Port and Polish Ferrea 6000 Series Valve Seats Ferrea Valve Locks Ferrea Valve Stem Seals Ferrea Stainless 6000 Series Valves Ferrea 6000 Series Beehive Valve Springs Ferrea 6000 Series Beehive Titanium Retainers Ferrea Roller Rockers Ferrea Roller Camshafts All New Bearings Through Out Billet Cam Seal Unorthodox Light Weight Crank Pulley OBX Lightweight Pulley Kit OBX High Volume Fuel Rail Thermal Intake Manifold Gasket Skunk2 Pro Intake Manifold Skunk2 Pro 70mm Throttle Body Skunk2 Pro Titanium Cam Gears Tial 46mm Wastegate GT 35/40r Garret Turbo Vision 10.3mm Spark Plug Leads NGK Platinium Spark Plugs Jun Spark Plug Cover Vision External Coil Walbro 255Lb Fuel Pump Fuel Regulator JDM High Volume Fuel Filter GReddy Oil Filter NRG Engine Damper STR Dipstick Hasport Engine Mounts with 70A Bushings HKS SSQV BOV OBX 1.5 LSD Extreme Carbon Cushion Button Clutch Fidanza 8Lb Flywheel . And this is where he is with it now....
Last edited by ThePacman; 16-07-2012 at 03:20 PM.
When words fail, Vtec speaks....!
G22! Now THAT is awesome. Don't think i've heard of one in Australia before?! Brilliant combo' though.. Looks mint.
It's not 4x4 status, think of it as "Winter Mode".
Cool project Why front wheel drive?
Cause Civics are front wheel drive....! He's considered the conversion though....!
thats insane!!!!!!!!!!!!!!!!
looks fantastic.... what power figures is that making? 250+atw?
He's expecting an easy and relyable 400fwhp @ around 15lb...... Added engine shipping list to first post.....
Originally Posted by ThePacman He's expecting an easy and relyable 400fwhp @ around 15lb...... Added engine shipping list to first post..... Should be well possible! I know of a few G22A's making 500+ WHP with under 20psi.
Yeah, it's a reasonable figure. I'm just worried that it will be a dog for him to drive. It'll be lucky to idle under 2000rpm. And this is supposed to be his daily...
Originally Posted by ThePacman Yeah, it's a reasonable figure. I'm just worried that it will be a dog for him to drive. It'll be lucky to idle under 2000rpm. And this is supposed to be his daily... I re-read the shopping list. What cc injectors? What compression? Hopefully standard ratio.. I can't see any reason this won't achieve factory idle.
He's using RC 750cc injectors, not sure what his c/r is. But with the roller cam set up, no Vtec, those cams are HUGE....! It wil idle like a bitch....!
noooo! no vtec
Forum Rules
Bookmarks