exhaust and headers for b18c2

[sammutn90]

Hi

I am looking in buying an exhaust for my car i have done abit a research on some exhaust but i am thinking of getting skunk2 megapower 60mm exhaust Or should i look into 2/5 ich exhaust.

And what would be a good headers to run with the skunk2 exhaust nothing to price etc (toda headers) something that would be good enough to run with my exhaust

thanks

[dougie_504]

For header, Fujitsubo, 5Zigen, RS-R, PLM or XForce if you're on a tight budget/can't find anything else.

Bigger budget obviously you look at things like TODA, Mugen, Spoon maybe.


60mm or 2.5" it doesn't really matter IMO but if you're just going to stick to N/A and basic mods I'd go the 60mm. If you're looking at head work later, cams etc, then I'd go the 2.5".

[nate92]

If your on a tight budget I suggest,
PLM headers or xforce as the best bang for bucks

Also skunk2 is good but might be abit loud with the whole cannon thing, so if you want get a
Xforce twin loop which is excellent for the price and quieter
Which will keep you away in the boys in blue.

It will cost pretty much the same IMO

Let me know aswell if u need any help and parts

[sammutn90]

no worreis thanks for advice.

should i run a high flow cat?

but i want the raspy noise but not sure what exhaust would do that?

[dougie_504]

Stainless steel gives you a raspy sound. Mild steel gives you a throbbing sound.

Vast majority of pre-fabricated aftermarket exhausts are stainless. Mostly custom exhausts have the mild steel option.


And yes, get a high-flow cat that matches the size of your cat-back. 100CEL.

[Evok]

OEM type r 4-1
PLM Makes good replica's
Or find cheap Mugen 4-1

Yes 100 cell high flow, but it doesn't pass emissions...just letting you know

[sammutn90]

no worries thanks

[sammutn90]

i was wondering if i could run a skunk2 megapower 60mm exhaust.
headers skunk2 megapower alpha headers but its 2/5 inch would this work with my exhaust being only 2 and quater inch?

[infurNOS]

i was wondering if i could run a skunk2 megapower 60mm exhaust.
headers skunk2 megapower alpha headers but its 2/5 inch would this work with my exhaust being only 2 and quater inch?

It would work, but you will create a bottleneck type effect. Also your exhaust shop will need to weld on a 2.5" to 2 1/4" adaptor type thing (not sure what it is called exactly) or expand the opening of your exhaust OR make the collector of the header from 2.5" to 2 1/4", most likely costing you more.

[sammutn90]

ohk no worries

would xforce twinloop be good or not really? and sould i run 2/5

[nate92]

yeah its good for the price and its much quieter then other cannon like exhaust and gives a nice tone aswell. Even though its quieter it wont effect the performance

[dougie_504]

Personally I like the Fujitsubo Power Getter. Cannon but great tone and not that loud. Looks awesome.