Neomax silvers coilovers C spanner

[VTC187]

Hey guys, I've lost my C spanner and just wondering if any other C spanner would fit my coilovers and were I could get one from.

Thanks

[EKVTIR-T]

Toledo make universal C wrenchs that might work. Just check for the right diameter range

http://www.blackwoods.com.au/search/...ches/302028193



Otherwise get any CNC or waterjet capable shop to make a set from sheetmetal

[bennjamin]

If you are stuck - you can use a big flathead screwdriver and a small mallet to loosen/tighten the perches.

[CRXDEL501]

If you are stuck - you can use a big flathead screwdriver and a small mallet to loosen/tighten the perches.

Agreed !

[VTC187]

Wouldn't this method damage the coilovers?

[bennjamin]

Wouldn't this method damage the coilovers?

Do it with consideration - and a little WD40 or similar on the threads and you will not damage the perches. It's not to be adopted but a temporary fix !

[DakDak]

I'll sell u mine if you want.

[VTC187]

How much dakdak?

[VTC187]

Thanks for the info guys, bought some c spanners from dakdak

[lanka05]

I am in need of C-spanners as well for the neomax coilovers.. does anybody know what the mm is so i can find one online?

[dc5dave]

AMR makes keys for these coilovers
http://hondamarketplace.com/showthre...2934851&page=2

[lanka05]

Thanks guys, But with the top lock ring, how do you loosen that? Is there a special c-spanner after removing the allen screw?