Page 1 of 4 1234 LastLast
Results 1 to 12 of 42
  1. #1
    Member Array
    Join Date
    Dec 2005
    Location
    NSW
    Car:
    EK1

    For the sound system experts! Need your help. 1998 Honda Civic Ek1

    To keep things short:
    - I currently have Kenwood KDC U449 Head Unit
    - I want to Replace front
    - I want to Replace back
    - I want to Purchase Amp
    - No Sub (boot is quite small but maybe sub if speakers are not good enough)
    - Installation fee is needed

    Sound preference:
    - Bass/beaty
    - RnB

    Budget
    - Value for money

    I'm currently looking over here:
    http://www.soundmaster.com.au/Car-Au...inch-Speakers/

    Any recommendations on BOTH speakers + amp?

    After doing some research, it seems the way to go is to get quality/clarity sounds on the front and do watever to the back. I also think that the speaker size for both front and back are 6x9. Correct me if I'm wrong!
    Last edited by Honda; 24-07-2012 at 08:12 AM.

  2. #2
    Member Array
    Join Date
    Sep 2007
    Location
    brissy
    Car:
    EK
    Front: 6" split system
    Rear: 6x9 or keep original and get a sub.
    Amp: 4ch to drive your fronts and your sub, and run the rears 6x9 off your HU.

    Since you're looking for more bass you wont be able to achieve that with 6x9 at the rear in a value for money aspect. Get a sealed box too. You will get less volume compared to ported box but will be much clearer.

  3. #3
    Member Array
    Join Date
    Mar 2011
    Location
    Brisbane Qld
    Car:
    2 Tonne Ek Tank
    Whats your budget?
    this should be in ICE section.


    Front: 6.5 inch components, brands i usualy recommend to look at are focal and morel
    Rear: nothing, better off spending money on front speakers, they are the ones you listen too.
    Amp: 2 ch amp or 4ch bridged, alpine make quite good amps

    Sound deadening and proper mounting is some thing you should consider, without it your speakers will sound hollow and lack bass, heres a diy if your interested in doing it yourself http://www.ozhonda.com/forum/showthr...ing-your-doors the work i see come out of audio shops is usualy not the best so your better off doin it yourself if your handy.
    "I have no idols. I admire work, dedication and competence." - Ayrton Senna


  4. #4
    Member Array
    Join Date
    Dec 2005
    Location
    NSW
    Car:
    EK1
    Quote Originally Posted by TbM View Post
    Whats your budget?
    Front: ?
    Amp: ?
    Installation: ?

    Unknown, I would probably say 600-800? Provided that I source the products from cheap places rather than retail stores as the difference is about 200-400 depending on the product. Just a rough estimate as I don't really know the best prices for the one I want yet. (I don't know which to get! there are so many!!)

    I'm thinking of sourcing the products then getting some place to install it for me.

    Back: Considering leaving it stock
    Sub: Have one lying around so I could probably use that

    If anyone knows where to get audio products at cheap prices, let me know!
    I see some on amazon from quick google searches

  5. #5
    Member Array
    Join Date
    Mar 2011
    Location
    Brisbane Qld
    Car:
    2 Tonne Ek Tank
    whats your location?
    do you already have the wiring and interconnects to hook up the amp?

    Front: 2 way morel tempo 6.5 inch $350 ish retail
    Amp: alpine mrx-f35 $250-$300 online
    Install: i have no idea what they charge as i DIY, i recommend you do the same.
    Extras: Dynamat door kit $70 ish, 1 inch mdf spacer
    "I have no idols. I admire work, dedication and competence." - Ayrton Senna


  6. #6
    Member Array
    Join Date
    Oct 2006
    Location
    Melb
    Car:
    P1.5 460F/350R
    tbm ice master
    ill report you to afp m8
    S P A M | W O R K S
    With our special rotational tires, it will allow you to drive very fast. - JK Tyre

  7. #7
    Member Array
    Join Date
    Mar 2011
    Location
    Brisbane Qld
    Car:
    2 Tonne Ek Tank
    Quote Originally Posted by mocchi View Post
    tbm ice master
    ill report you to afp m8
    "I have no idols. I admire work, dedication and competence." - Ayrton Senna


  8. #8
    Member Array
    Join Date
    Dec 2005
    Location
    NSW
    Car:
    EK1
    Quote Originally Posted by TbM View Post
    whats your location?
    do you already have the wiring and interconnects to hook up the amp?
    NSW Liverpool
    I don't have wiring/interconnects

    Quote Originally Posted by TbM View Post
    Front: 2 way morel tempo 6.5 inch $350 ish retail
    Amp: alpine mrx-f35 $250-$300 online
    Install: i have no idea what they charge as i DIY, i recommend you do the same.
    Extras: Dynamat door kit $70 ish, 1 inch mdf spacer
    I haven't heard of morel before. Would it be hard to find a place that has it on display?

    Do you know any DYI to hook up and AMP + Speakers by any chance?

  9. #9
    Member Array
    Join Date
    Mar 2011
    Location
    Brisbane Qld
    Car:
    2 Tonne Ek Tank
    you will need to add another $50-100 ish for the wiring and rca's

    fhrx is the place to go in sydney, dont know if they are close, they should have some morels on dispay iirc, listen to other speakers too dont just go off what i say

    dont know of a diy but this might help, http://www.ozhonda.com/forum/showthr...to-amp-to-sub. explains the basics of it, i can show you pics of where i ran my cables if you need some help
    "I have no idols. I admire work, dedication and competence." - Ayrton Senna


  10. #10
    Member Array
    Join Date
    Dec 2005
    Location
    NSW
    Car:
    EK1
    Quote Originally Posted by TbM View Post
    you will need to add another $50-100 ish for the wiring and rca's
    Any recommendations on those? A link to eBay or a online shop would be nice

  11. #11
    Member Array
    Join Date
    Mar 2011
    Location
    Brisbane Qld
    Car:
    2 Tonne Ek Tank
    Quote Originally Posted by Honda View Post
    Any recommendations on those? A link to eBay or a online shop would be nice
    i use stinger wiring and rca's for my car, they do the job well. Elite electronics have some decent prices and ship quickly, if you dont mind waiting it can be better to order stuff from usa ebay but that takes a while to get here usualy.

    heres a couple examples of wiring kits which makes it easy, you can also buy the individual parts if you prefer.
    http://www.elite-electronics.com.au/...oducts_id=1165
    http://www.elite-electronics.com.au/...oducts_id=1214
    http://www.elite-electronics.com.au/...roducts_id=445
    "I have no idols. I admire work, dedication and competence." - Ayrton Senna


  12. #12
    Member Array
    Join Date
    Mar 2011
    Location
    Brisbane Qld
    Car:
    2 Tonne Ek Tank
    you will only need 8 gauge wire and 2 ch rca's if you just running front speakers, if your planning to run a sub or more speakers in the future you should get 4 gauge and 4 ch rca's. to save you from replacing the wire.
    "I have no idols. I admire work, dedication and competence." - Ayrton Senna


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.