Results 1 to 6 of 6
  1. #1

    DC2R gearbox replacement

    Hey, my gearbox has been crunching a lot mainly in 2nd and 3rd gear, im sending it to a gearbox specialist to see whats wrong with it, but incase i have to replace the gearbox, does anyone know what im looking to pay for a new one or second hand one? Thanks.

  2. #2
    Member Array
    Join Date
    Oct 2006
    Location
    Melb
    Car:
    P1.5 460F/350R
    dc2r gearbox goes for about 1k / 1.5k for 96 / 98 spec
    then add labour about $500 or so to swap gearbox.

    rebuild your 2 gears probably 2k.

    you in syd? pm benjammin / na-118 for box job
    S P A M | W O R K S
    With our special rotational tires, it will allow you to drive very fast. - JK Tyre

  3. #3
    Member Array
    Join Date
    Jan 2010
    Location
    Brisbane
    Car:
    Integra
    Quote Originally Posted by mocchi View Post
    dc2r gearbox goes for about 1k / 1.5k for 96 / 98 spec
    then add labour about $500 or so to swap gearbox.

    rebuild your 2 gears probably 2k.

    you in syd? pm benjammin / na-118 for box job

    My dc2r gearbox getting rebuilt and parts costing around 600ish with all the carbon synchro kit, and with hub sleeves. Labour is 500-600 for a full overhaul and installing parts

    labour is 300 for gearbox in and out
    無限 The Form is in the Function 無限
    teamGROUNDzero

  4. #4
    Member Array
    Join Date
    Oct 2006
    Location
    Melb
    Car:
    P1.5 460F/350R
    Quote Originally Posted by DC2-PWR View Post
    My dc2r gearbox getting rebuilt and parts costing around 600ish with all the carbon synchro kit, and with hub sleeves. Labour is 500-600 for a full overhaul and installing parts

    labour is 300 for gearbox in and out
    is this including the gears and bearings? i see full overhaul is to replace everything, not just the synchros.
    cos sometimes the gears would be worn as well and needs to be replaced.
    S P A M | W O R K S
    With our special rotational tires, it will allow you to drive very fast. - JK Tyre

  5. #5
    Member Array
    Join Date
    Sep 2008
    Location
    Melbourne
    Car:
    Kermit K20A
    Location would help for relative pricing
    Kermit EGK20A
    Winton: 1:35.08
    Wakefield: 1:08.8

  6. #6
    Member Array
    Join Date
    Jan 2010
    Location
    Brisbane
    Car:
    Integra
    Quote Originally Posted by mocchi View Post
    is this including the gears and bearings? i see full overhaul is to replace everything, not just the synchros.
    cos sometimes the gears would be worn as well and needs to be replaced.
    Gears were fine, gears don't need to be changed if they arn't damaged. It is mainly the synhcro and hub sleeve that needs replacing. Yes with a few bearings but not 100% on which ones as my gearbox guy did it. Still in the budget of <$600

    One problem with my third gear that outer surface was bent, however the guy said he can straighten it up and re-surface it. Problem was the previous owner of the gearbox must've missed shiffed very hard and caused damaged. Still charged me $500 for the gearbox labour.

    Location is in QLD Brisbane pricing from an experianced bloke.

    OT, don't buy a 2nd hand gearbox if it wasn't rebuilt. If it was rebuilt have them showing you the paper work, and chase it up. Just a tip
    無限 The Form is in the Function 無限
    teamGROUNDzero

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.