+ Reply to Thread
Results 1 to 9 of 9
  1. 29-08-2012 10:29 PM #1
    EGG5
    EGG5 is offline
    Newcomer EGG5 is an unknown quantity at this point
    Join Date
    Aug 2012
    Car:
    EG5 VTi

    EK9 Muffler Straight bolt on to Xforce system

    Hi Guys,

    My EG is currently running an Xforce cannon exhaust system and was wondering if an EK9 muffler would bolt straight onto the Xforce system?

    And also if the EK9 Muffler would need new hangers?

    Sorry for the nooby question!

    Cheers guys!
    Reply With Quote Reply With Quote
  2. 31-08-2012 06:09 AM #2
    Renaissance_x
    Renaissance_x is offline
    Member Renaissance_x is a glorious beacon of light Renaissance_x is a glorious beacon of light Renaissance_x is a glorious beacon of light Renaissance_x is a glorious beacon of light Renaissance_x is a glorious beacon of light
    Join Date
    Dec 2010
    Car:
    CR-X
    Any exhaust shop could make it fit and add some new hangers but I don't recomend it if the exhaust inlet is bigger than the exhaust you have on it now.
    Reply With Quote Reply With Quote
  3. 03-09-2012 07:07 PM #3
    EGG5
    EGG5 is offline
    Newcomer EGG5 is an unknown quantity at this point
    Join Date
    Aug 2012
    Car:
    EG5 VTi
    Quote Originally Posted by Renaissance_x View Post
    Any exhaust shop could make it fit and add some new hangers but I don't recomend it if the exhaust inlet is bigger than the exhaust you have on it now.
    Ah alright cheers!, why dont you recommend it if one inlets bigger than the other?
    Reply With Quote Reply With Quote
  4. 03-09-2012 07:24 PM #4
    rhys.l
    rhys.l is offline
    Member rhys.l has made a significant amount of informative posts rhys.l has made a significant amount of informative posts rhys.l has made a significant amount of informative posts rhys.l has made a significant amount of informative posts
    Join Date
    Nov 2009
    Car:
    dc2r
    Should bolt on mate
    Reply With Quote Reply With Quote
  5. 03-09-2012 10:36 PM #5
    HondaTurboVtec
    HondaTurboVtec is offline
    Member HondaTurboVtec is a glorious beacon of light HondaTurboVtec is a glorious beacon of light HondaTurboVtec is a glorious beacon of light HondaTurboVtec is a glorious beacon of light HondaTurboVtec is a glorious beacon of light
    Join Date
    Jul 2012
    Location
    Brisbane
    Car:
    (.Y.)
    Quote Originally Posted by EGG5 View Post
    Ah alright cheers!, why dont you recommend it if one inlets bigger than the other?
    I'm confused are you fitting the oem exhaust piping to the xforce muffler? If so what are the diameter on both?
    VTEC Gets You Laid!!!!!
    Reply With Quote Reply With Quote
  6. 04-09-2012 12:18 AM #6
    EGG5
    EGG5 is offline
    Newcomer EGG5 is an unknown quantity at this point
    Join Date
    Aug 2012
    Car:
    EG5 VTi
    Quote Originally Posted by rhys.l View Post
    Should bolt on mate
    Alright cheers, ill give it a shot on the weekends!

    Quote Originally Posted by HondaTurboVtec View Post
    I'm confused are you fitting the oem exhaust piping to the xforce muffler? If so what are the diameter on both?
    OEM EK9 Muffler to Xforce piping
    Reply With Quote Reply With Quote
  7. 04-09-2012 04:52 PM #7
    HondaTurboVtec
    HondaTurboVtec is offline
    Member HondaTurboVtec is a glorious beacon of light HondaTurboVtec is a glorious beacon of light HondaTurboVtec is a glorious beacon of light HondaTurboVtec is a glorious beacon of light HondaTurboVtec is a glorious beacon of light
    Join Date
    Jul 2012
    Location
    Brisbane
    Car:
    (.Y.)
    Quote Originally Posted by EGG5 View Post
    OEM EK9 Muffler to Xforce piping
    Are they both same size or?
    VTEC Gets You Laid!!!!!
    Reply With Quote Reply With Quote
  8. 04-09-2012 06:24 PM #8
    Spoon SiRG
    Spoon SiRG is offline
    Member Spoon SiRG seems to know what they're on about Spoon SiRG seems to know what they're on about
    Join Date
    Feb 2007
    Location
    Western Sydney
    Car:
    DC2 & GE8
    NO it will not bolt on.

    The X force B-pipe uses a different flange. (flat)

    You will need to cut & weld an OEM EK9/ DC2R OEM B-pipe flange onto the X force B-pipe; or cut & weld an aftermarket flange onto the EK9 axleback; or just weld them together lol.

    The OEM hangers just need to be slightly bent in to fit your EG Hatch nicely.

    Might as well cut & shorten the tip to sit flush with the bumper. (Will stick out a bit)
    www.above5500rpm.cjb.net
    Reply With Quote Reply With Quote
  9. 04-09-2012 06:40 PM #9
    mcOZ
    mcOZ is offline
    Member mcOZ Knows a bit of info here and there
    Join Date
    Mar 2012
    Location
    S.E Melbourne
    Car:
    92' EG5
    Quote Originally Posted by Spoon SiRG View Post
    NO it will not bolt on.

    The X force B-pipe uses a different flange. (flat)

    You will need to cut & weld an OEM EK9/ DC2R OEM B-pipe flange onto the X force B-pipe; or cut & weld an aftermarket flange onto the EK9 axleback; or just weld them together lol.

    The OEM hangers just need to be slightly bent in to fit your EG Hatch nicely.

    Might as well cut & shorten the tip to sit flush with the bumper. (Will stick out a bit)
    ^+1

    I just installed my OEM EK9 muffler onto my X force system, just need to do what Spoon SiRG said and it will fit nicely.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.