Exhaust piping size on aftermarket

[YER801]

Hey guys!
So looking into catbacks and im quoted about 550 for a system which is 2.5" then splits to 2" each side with muflers and tips..
My question is mainly because I find it weird going to 2".. I was just wondering what size does the other systems consist of? I was thinking 2.5" the whole way.

cheers guys

[dc2r-0636]

im guessing its for a euro?

coz it goes from single to duel exhaust only half the gasses will be going thru the passenger side exhaust and half to the drivers side.
so u dnt need 2.5" on either side. 2" is plenty

[YER801]

Ah good, that makes sence. Just double checking so it doesnt sound quiet as and be restrive..
Also do they drone at all?

[dc2r-0636]

the more mufflers u have the quieter it will be.
cant say if it wil drone tbh, never been in a euro with aftermarket exhaust

[dc2r-0636]

also what type of exhaust is it? mandrel or press bent ?
stainless steel or mild steel?

[YER801]

Mandrel mild steel, I like the sound of the mild steel ones better.. And easier on my pocket.

Yeah ive never listened to a euro with an exhaust system either tbh. Hoping to get some insite from whose been there done that

[Fredoops]

Mandrel mild steel, I like the sound of the mild steel ones better.. And easier on my pocket.

Yeah ive never listened to a euro with an exhaust system either tbh. Hoping to get some insite from whose been there done that

You're welcome :-P

http://www.ozhonda.com/forum/showthr...-sound-thread&

[YER801]

You're welcome :-P

http://www.ozhonda.com/forum/showthr...-sound-thread&

Yeah, ive seen that thread but sound recordings dont do justice

[MR_LATE]

itll be loud on a cold start and quieten down once its warm
when u step on the gas youll hear the engine more-so
wont do the milo tin-can noise especially if it from catback?

[androo]

mind me asking where you are herring your exhaust done?

[YER801]

Its called custom fit exhaust centre
Its in my little town. Theres an a1 here but the guy has no standards and fit anything for money. Custom fit more aim to make a good sound.
Anyone that can measure the size of their piping?

[MR_LATE]

U know. It might cost a lil more but u coild get them flanged so u can put them on and off