My CU2 Euro

[MR_LATE]

Ive got chrome finish ones. The plastic just under the dealers name. I dont know how much it is for protectors since i got mine as a present.
Haha and the rear mrgu is talking is skylude

[ExpressCoffee]

Ahh sweet.

I was wondering if anyone can help me,
I've only had my car a few days and just noticed this on my car bonnet. I always pretty much park undercover when possible but it seems like something corrosive has been dropped on my bonnet. There's about 5-6 of these 'drops' and it looks like the paint is cracking..


What can I do!?
It's not very visible unless you're looking out for it but it looks like it'd get progressively worse.

[MR_LATE]

daaaaaaam bat shit.

[ExpressCoffee]

The pic makes it look worse than it is.. But it still will get worse! And it's not any type of poop cause it would have been like a layer of poop on it.

[roony]

I had something similar, the clear coat had been etched. No amount of polishes helped. I got a sanding bar 2000 grit. Lightly did it then used meguiars 105m polish compound. Came out excellent.

Got super glu on my bonnet trim too recently, did the dame method.

Try at your own risk however.

[ExpressCoffee]

I had something similar, the clear coat had been etched. No amount of polishes helped. I got a sanding bar 2000 grit. Lightly did it then used meguiars 105m polish compound. Came out excellent.

Got super glu on my bonnet trim too recently, did the dame method.

Try at your own risk however.

Thanks man.
By sanding are you effectively removing the clear coat though? so would it make this area more exposed?

[roony]

yes u are removing the clear cloat but I did it lightly, im sure not much would have been taken off. It only has a certain thikness to it. Unless you have been buffing out your car frequently I wouldnt worry about it as such. There is some sort of tool I think that measure the thickness. I was hesitant at first but I tried it, willing to risk it and it worked out beautifully. I tested on some paint chips too, filled them in and sanded it after, result was very good.

[antony]

Pleaase remove the Essendon Chrysler /Jeep number plate holders,as they makr the car look second hand...

Maybee replace with Essendon Honda number plate holders ???

[mrgu]

Do the Travis Honda one cos it has a type r looking badge

[ExpressCoffee]

Haha just removed them!

Do the Travis Honda one cos it has a type r looking badge

What do they look like?

[nesterjester]

Should carbon fibre dip your bonnet.

[ExpressCoffee]

Should carbon fibre dip your bonnet.

Hey mate, I actually just ordered carbon fibre wrap for it, inspired by the dude with the blue CL9 euro

Any places that do the carbon dipping thing?