Page 1 of 6 1234 ... LastLast
Results 1 to 12 of 63
  1. #1

    Reputable Engine Builder in SYDNEY?????

    Hi guys as per title im in search of a reputable engine builder/ machine shop. Preferably with experience with big BHP Honda builds. They need to be top blokes and be in the Sydney area. Any suggestions, with examples of work carried out would be most appreciated.

    Mike

  2. #2
    Almost 50 views and not one person knows a good engine builder, am I up a creek without a paddle?

  3. #3
    Member Array
    Join Date
    Aug 2005
    Car:
    "07" CL9 Limited Lux
    Try BYP.

  4. #4
    Member Array
    Join Date
    Jun 2010
    Location
    Gold Coast
    Car:
    s2000
    No personal experience, but Croydon Engineering seem fairly good.

  5. #5
    Member Array
    Join Date
    Aug 2011
    Location
    Sydney
    Car:
    Honda S15
    DO NOT go to Charlie at Good Performance Centre in Yennora.
    Choke dealer

  6. #6
    Member Array
    Join Date
    Oct 2011
    Location
    Sydney
    Car:
    EG5 B18C7
    Dr Honda . has worked on my car from suspension to head rebuild .

    reconditioned my head from the dodgy engine that BYP sold to me .

    top bloke , genuine mechanic that knows what he's doing . if your interested , pm me. will vouch him anyway over the majority in the Honda community .

    BYP is ****ed , ****ed me over .
    " MY VTECC GOES BWAHHHHHHHH BAHHHHHHH BWA BWA BWAAHHHHHHH "

  7. #7
    Member Array
    Join Date
    Oct 2006
    Location
    Melb
    Car:
    P1.5 460F/350R
    you wanna build what engine?
    big bhp d series?

    pm thesaint, he's the master of d series engine
    S P A M | W O R K S
    With our special rotational tires, it will allow you to drive very fast. - JK Tyre

  8. #8
    Quote Originally Posted by joeyybruh View Post
    Dr Honda . has worked on my car from suspension to head rebuild .

    reconditioned my head from the dodgy engine that BYP sold to me .

    top bloke , genuine mechanic that knows what he's doing . if your interested , pm me. will vouch him anyway over the majority in the Honda community .

    BYP is ****ed , ****ed me over .
    out of curiosity how was the motor that byp sold you so dodgy?
    and why didnt you take it back to them and refund it if the motor was crap?
    WP: 1.03.4
    Winton: 1.30.9

  9. #9
    Member Array
    Join Date
    Mar 2007
    Location
    www.letusdrive.com.au
    Car:
    D15B7 YOOOOOO!
    Be careful what you say about the saint I got banned for months cause of that **** of a thing


    Jdm d series yo

    Quote Originally Posted by mocchi View Post
    you wanna build what engine?
    big bhp d series?

    pm thesaint, he's the master of d series engine
    Check out my build thread EGB16T. http://www.ozhonda.com/forum/showthr...build../page14
    Check out my for sale thread constantly updated with b series/ eg parts!

    Wakefield Honda Nationals First Timer : na-118 EG b16 1:16.4900

  10. #10
    Member Array
    Join Date
    Oct 2011
    Location
    Sydney
    Car:
    EG5 B18C7
    Quote Originally Posted by damienm View Post
    out of curiosity how was the motor that byp sold you so dodgy?
    and why didnt you take it back to them and refund it if the motor was crap?
    sold me a motor with leaking fuel in the throttle body , 4th piston was wet , leaking injectors , aircon lines were hitting the fan , clutch slave died and had had to pay to replace even though should have been replaced by them , charged 250 for it, lines were butchered ,wiring in the engine bay was exposed, charged me 400 for a moderate tuck where they only tucked the wires under the splash guards next to the front camber kits rubbing on them causing fire hazard , charged extra 100 bucks to set my HID kit ?? they hid the fog light wiring , mate of mine found it when we had to reroute the dodgy wire tucking.
    have full pictures of everything we found associated with the engine swap .
    charged 500 on tune that made no power or noticeable difference , was still burning oil blowing smoke , was never given a receipt for anything I purchased until I threatened to take legal action ,

    wanted to get the engine registered and instead of giving me the details of the old owner legally signed he gave me a piece of paper with details , told me to follow it up myself which should have been provided .

    spoke to the old owner that purchased a K24 swap and heard his story. he had beef with them too hence why he didn't sign anything. was quoted 10 k for a k swap but ended up paying 20 k .

    BYP offer no assistance with anything that happened , offer no warranty or reimbursement .

    no wonder fair trading cases have been put against them .

    this is my personal opinion , Yes they import with great prices but wouldn't trust them with anything , end of the day they are business and only care about money .

    I have my story and many alike .
    Last edited by joeyybruh; 24-09-2012 at 11:58 AM.
    " MY VTECC GOES BWAHHHHHHHH BAHHHHHHH BWA BWA BWAAHHHHHHH "

  11. #11
    Member Array
    Join Date
    Mar 2007
    Location
    www.letusdrive.com.au
    Car:
    D15B7 YOOOOOO!
    Post up pics to back it up
    Check out my build thread EGB16T. http://www.ozhonda.com/forum/showthr...build../page14
    Check out my for sale thread constantly updated with b series/ eg parts!

    Wakefield Honda Nationals First Timer : na-118 EG b16 1:16.4900

  12. #12
    Member Array
    Join Date
    Apr 2010
    Location
    Sydney
    Car:
    OGK24A
    Quote Originally Posted by DakDak View Post
    DO NOT go to Charlie at Good Performance Centre in Yennora.
    Care to share your story with Charlie from GPC?
    Cheers
    4dr♥

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.