Page 2 of 2 FirstFirst 12
Results 13 to 18 of 18
  1. #13
    Moderator Array
    Join Date
    Dec 2004
    Location
    Sydney, Australia
    Car:
    Honda Civic VTi
    Quote Originally Posted by DreadAngel View Post
    Sponsorship - I guess start off with the official/big distributors/dealers of Honda tuning parts ...
    I think the basics need to be sorted first - sporting regulations and rules, car specs, events (eg no. of races x no. of events)

    Quote Originally Posted by Benson View Post
    How many Honda car's do you need to make it a viable series?
    Benson, I think anything over 15 would be spectacular but overall you want about 20+ to give everyone a chance to race throughout the field, plus to provide exposure to spectators and sponsors.

    Quote Originally Posted by Riced_Civic View Post
    any chassis with stock B18, IHE, Coilovers, 16 Rims, control R compound tyre, CAMS Cage.

    makes it easy for every one and not over the top spending.
    A good start Mr. Riced but I think you have to allow categories to maximise entries so here's my thinking

    Category 1: Dseries 1.5 and 1.6

    Category 2: Bseries 1.6 and 1.8

    Category 3: BSeries 2.0 plus HSeries

    Category 4: KSeries 2-.0/2,4 +

    Each of these four categories will have basic freedoms - intake, exhaust, brakes, but limited engine mods plus suspension mods - rollbars, coilovers, strut bracing

    Basic safety features for everyone along CAMS lines - fuel, rollcage, seat, fire extinguisher, etc

    Control tyre and control fuel.

    That's just my thinking at this point. I need to investigate more with the UK guys, talk to CAMS and AASA, plus talk to the circuit (Wakefield Park)

    Peter

    Keep the ideas coming guys - it inspires everyone to think that this might be possible if not 2013 then maybe 2014.
    Last edited by jdm_b16a; 10-10-2012 at 05:31 PM.
    Still here. Still kickin'

  2. #14
    Moderator Array
    Join Date
    Dec 2004
    Location
    Sydney, Australia
    Car:
    Honda Civic VTi
    Further to my thoughts about categories ...

    So Category 1 would exclude ED/EF Civics with B swaps

    Category 2 would exclude all models with non-standard engines (that is, EGs with K series swaps)

    The categories would be

    Category 1 - All models using a 1.5 or 1.6 D series engine as standard. No models before 1988.

    Category 2 - All models using a B Series as standard

    Category 3 - Preludes, Accords using H Series (or F Series) as standard

    Category 4 - All K Series models including Accord Euro, Integra R

    Anyone want to have a go at ascribing models to each of these categories?

    As far as the roll cage is concerned it would have to meet current safety specs as prescribed by CAMs so full cage, welded in.

    Control tyre could be any manufacturer (probably invite tenders here and see what comes up)

    Strut bars can be upper & lower, front & back

    Control fuel eg. 98 octane but not E85.

    Suggested rim sizes would be 15in for categories 1 & 2; 17in for categories 3 & 4.

    Peter
    Still here. Still kickin'

  3. #15
    Account Disabled Array
    Join Date
    Aug 2004
    Location
    Garage
    Peter, have a look into New Zealand Honda Cup series. Its so popular over there that they are selling grid spots!

  4. #16
    I could be down for this. put a Dseries in the civic
    WINTON PB: 1:36.30
    WAKEFIELD PB: 1:07.59
    Supported by: Hybrid Racing + Hardrace Australia
    MSC Performance FTW

  5. #17
    Moderator Array
    Join Date
    Dec 2004
    Location
    Sydney, Australia
    Car:
    Honda Civic VTi
    By standard I mean "Australian delivered" as some might say, for example, that EF came with B16A in Japan.

    Peter
    Still here. Still kickin'

  6. #18
    Moderator Array
    Join Date
    Dec 2004
    Location
    Sydney, Australia
    Car:
    Honda Civic VTi
    I have created a new thread "Honda Challenge Australia". Can we continue the discussion there?

    Peter
    Still here. Still kickin'

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.