Page 3 of 4 FirstFirst 1234 LastLast
Results 25 to 36 of 40
  1. #25
    Newcomer Array
    Join Date
    Oct 2012
    Car:
    Accord Euro 04
    Just curios are there any downsides of getting the cross drilled one? I wouldn’t mind paying an extra bit for looks… Wouldn’t it last longer as well?

  2. #26
    Member Array
    Join Date
    Apr 2011
    Location
    around and about
    Car:
    05 CL9 Luxxx
    Cross drilled are more susceptible to cracking between drill holes and are known to warp faster

  3. #27
    Member Array
    Join Date
    Dec 2010
    Location
    Brisbane
    Car:
    '06 Euro Std 5A
    I am looking to replace my front rotors on the CL9. Is the diameter 288mm or 300mm? Because both are coming up...
    '06 Accord Euro Std
    Stock standard =|

  4. #28
    Newcomer Array
    Join Date
    Oct 2012
    Car:
    Accord Euro 04
    I believe the front rotors are 300mm, but can I get someone else to also confirm this…

  5. #29
    Member Array
    Join Date
    Jun 2006
    Location
    WA
    Car:
    EG+CL9
    i get all my brake gear from these guys ....

    http://gslrallysport.com/au/

    i use DBA 4000 T3 slotted rotors + Remsa pads + PMU Fluid on all of my cars =)
    ----------------------------
    D15b Turbo EG Sedan Build + CL9 Lux N/A Build
    http://www.ozhonda.com/forum/showthread.php?t=127680

  6. #30
    Member Array
    Join Date
    Aug 2009
    Location
    Melbourne, South East
    Car:
    DC5R
    I got my DBA 4000 T3 rotors from ABR Parts.
    Free shipping too!
    http://abrparts.com.au/index.php?id_...roller=product

  7. #31
    Member Array
    Join Date
    Mar 2012
    Location
    Melbourne
    Car:
    Accord Euro
    Quote Originally Posted by TheSaint View Post
    i get all my brake gear from these guys ....

    http://gslrallysport.com/au/

    i use DBA 4000 T3 slotted rotors + Remsa pads + PMU Fluid on all of my cars =)
    Do you find the remsa pads are super dusty? I got them put on my CL9 and my front wheels are half black after a week or two of normal driving :|

  8. #32
    Member Array
    Join Date
    Jun 2006
    Location
    WA
    Car:
    EG+CL9
    nope - almost no dust - less than the OEM spec ones that were on before
    what rotors are you using? - and did you use a good amount of brake cleaning fluid when you installed them?

    i have PMU (project MJU) type-NS pads and DBA normal slot rotors on my civic - and i find that the remsa/T3 slot combination is waaaay better
    the PMU/normal slot combo isnt too bad but you have to get them red hot for them to even be remotely useful lol

    i put HEL brake lines on the civic with the intention to put them on all of my cars
    i will never buy HEL again - the fitment was disgustingly poor - i had to modify them alot to make them fit
    the male/female fittings were terrible and i had to use thread tape to stop them from leaking - not happy

    ill try goodridge or PMU lines instead next time i think
    Last edited by TheSaint; 09-01-2013 at 04:25 PM.
    ----------------------------
    D15b Turbo EG Sedan Build + CL9 Lux N/A Build
    http://www.ozhonda.com/forum/showthread.php?t=127680

  9. #33
    Newcomer Array
    Join Date
    Oct 2012
    Car:
    Accord Euro 04
    Raising a old thread, but it will be useful for people in the future..

    Anyone know what the QFM HPX part number is for a preface lift 2004 cl9 is?

    Also the brake pad measurements may be useful.

  10. #34
    Newcomer Array
    Join Date
    Oct 2012
    Car:
    '04 Accord Euro
    Ah if no one can answer that right away, I do have a set of those exact pads ready to go in at home (will be like 4pm when i can find out but!) hopefully someone has them faster to help out but!

  11. #35
    Newcomer Array
    Join Date
    Oct 2012
    Car:
    Accord Euro 04
    That would be good!
    Tho i just got off the phone from QFM appreantly they dont make the HPX off the shelf for my car, and i'd have to get them custom made.. But i'm sure the same size pads exist for there cars and they will fit perfectly onto the euro.

  12. #36
    Newcomer Array
    Join Date
    Oct 2012
    Car:
    '04 Accord Euro
    Quote Originally Posted by thezaza101 View Post
    That would be good!
    Tho i just got off the phone from QFM appreantly they dont make the HPX off the shelf for my car, and i'd have to get them custom made.. But i'm sure the same size pads exist for there cars and they will fit perfectly onto the euro.
    They are nuts. I have a set for both front and rear sitting on the floor of my car at home right now! Will get numbers later today man!

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.