Results 1 to 8 of 8
  1. #1
    Newcomer Array
    Join Date
    Sep 2012
    Location
    Adelaide, SA
    Car:
    Integra VTi-R

    Wheel fitment on DC2 Integra?

    I currently have 17x7.5 +40 Lenso rims, and have been relatively happy with them, until last week I popped a flat tyre, pulled it off and found that the whole inside sidewall of the tyre has ripped through. Have I hit the tyre on my strut tower? I did the calcs and found that my rims sit 14mm closer to the suspension than stock.

    The rims I was looking at are the Rota Grid V's, 16x8 +20, as pictured here: http://www.rotaaustralia.com.au/rota..._p23280597.htm

    Would these fit fairly easily? I'm not too fussed about getting my guards rolled or having minorly stretched tyres, but I don't really want to do anything too major.

    My current rims sit like so: http://sphotos-g.ak.fbcdn.net/hphoto...94102954_n.jpg

    Any help/advice/suggestions/beratings would be appreciated, cheers.

  2. #2
    Moderator Array
    Join Date
    Apr 2008
    Location
    Melbourne
    Car:
    '90 EF8/'94 EH9
    Did you hear any rubbing? What are the other tyres condition like?

  3. #3
    Newcomer Array
    Join Date
    Sep 2012
    Location
    Adelaide, SA
    Car:
    Integra VTi-R
    I have rubbing on the front left on my guards, but I have to fix my suspension on that side. I didn't hear any rubbing from the one I popped though, but I was not exactly listening for rear rubbing, so I can't really say. But what I do know is that my current rims are 16 mm closer to my suspension than stock rims, so I just figured that is what happened.

  4. #4
    Moderator Array
    Join Date
    Apr 2008
    Location
    Melbourne
    Car:
    '90 EF8/'94 EH9
    I don't think 16mm would be that big of a deal TBH.

    Rear running you would certainly hear IMO, it's very loud.

    I'm clueless

  5. #5
    Member Array
    Join Date
    Sep 2008
    Location
    Melbourne
    Car:
    Kermit K20A
    I am running 16x8 +25 and it fits fine with guards rolled and pulled. There is a member on here with 15x9 +20something using standard camber arms on his eg so it can be done
    Kermit EGK20A
    Winton: 1:35.08
    Wakefield: 1:08.8

  6. #6
    Newcomer Array
    Join Date
    Sep 2012
    Location
    Adelaide, SA
    Car:
    Integra VTi-R
    Yeah okay that's reassuring. I've found the rims I'm going to get, they're brand new work meister replicas for $600 a set, 15x7 +20 which will fit like so: http://farm3.static.flickr.com/2562/...35d3170134.jpg

    What tire would I run on that? This is the first time I've changed a pair of rims/tyres or anything so I'm completely in the dark haha. I'm assuming 205/215, but I don't really know about profile and stuff, so help would be appreciated.

  7. #7
    Newcomer Array
    Join Date
    Sep 2012
    Location
    Adelaide, SA
    Car:
    Integra VTi-R
    Yeah okay that's reassuring. I've found the rims I'm going to get, they're brand new work meister replicas for $600 a set, 15x7 +20 which will fit like so: http://farm3.static.flickr.com/2562/...35d3170134.jpg

    What tire would I run on that? This is the first time I've changed a pair of rims/tyres or anything so I'm completely in the dark haha. I'm assuming 205/215, but I don't really know about profile and stuff, so help would be appreciated.

  8. #8
    Member Array
    Join Date
    Sep 2008
    Location
    Melbourne
    Car:
    Kermit K20A
    Run a 195/50R15
    Kermit EGK20A
    Winton: 1:35.08
    Wakefield: 1:08.8

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.