Results 1 to 2 of 2
  1. #1

    DC5R AUDM 2001 to EP3R JDM 2002

    I'm parting out a Australian DC5R and i am wondering if any of these parts are going to fit on a pre-facelift JDM ep3R. There are similar threads, and I've been through heaps, but none have confirmed these parts specifically.

    Ferrodo ds2500 pads.

    DBA front slotted rotors

    Koni Shocks with Eibach Springs

    I'm going to have to buy all of these new for the Ep3, and sell the dc5 parts. But i figured, what if they fit!

    Im more focused on the shocks and springs.

  2. #2
    Member Array
    Join Date
    Nov 2006
    Location
    Melbourne
    Car:
    DC5, EF8, EF2
    The pads will fit, as will the rotors. However the shocks and springs won't without modification, at the rear the lower bush on the shock will be too wide to fit into the space in the EP3R rear trailing arm, so you'll need to grind it down a bit. At the front you need to either change over to DC5R tie rod ends on the EP3, or remove the koni shock insert from the DC5 lower strut housing and put it into the EP3R strut housing (cutting out the original shock etc.).

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.