EK + S80 w/LSD Shift linkage.

[VIP-EK]

Hey all!
I have an EK4 with an s80 w/LSD from an ITR. Is there any difference between shift linkages between the standard EK (S4C) box and the ITR box. Im in need of a new shift linkage to suit my ek4 with the s80 box.

Thanks in Advance!

[VIP-EK]

Answer is that they do fit. Close thread!

[amant02]

its direct bolt on just cosmetic changes the angle of 2 mounts from memory when i did this.

But be prepared for disappointment unless this is the 4.7FD then you should be okay other wise be prepared.

[Limbo]

THe ITR linkages are larger and more solid.
It makes for better shifting.
The ek4 ones will work, but you will notice the difference if you change to the ITR ones

[bennjamin]

Hey all!
I have an EK4 with an s80 w/LSD from an ITR. Is there any difference between shift linkages between the standard EK (S4C) box and the ITR box. Im in need of a new shift linkage to suit my ek4 with the s80 box.

Thanks in Advance!

Mate as others have said - same working dimensions and fitment.
Just use your existing shift linkage, no need to throw money at something you don't need

[Forbiddenoob]

The del sol will work the same?

[bennjamin]

The del sol will work the same?

No . Del sol shift linkage is slightly different , and only useable with a b series motor into the eg2 chassis