Results 1 to 8 of 8
  1. #1
    Member Array
    Join Date
    Jan 2013
    Location
    Brisbane, qld
    Car:
    98 ek b18cr

    B18c7 loom in ek1??

    Okay I'm sure for some of you this may be a noob question but I have looked and haven't found any actual help.
    What I'm wanting to know is whether I can use the b18c7 loom and ecu for a heart transplant into an ek1.
    I know the loom stops at the strut tower and that everyone says to use the ek4 loom with adapter.
    But I'm wanting to DIY and make a tucked loom so the bay looks nice and clean. I have worked with electrical for majority of my working life so the physical part isn't too hard.
    I just want to know whether the loom will actually mate up to the ek1 or not.
    And if not can anyone give me the reason why??
    Thanks a heaps

  2. #2
    Member Array
    Join Date
    Oct 2006
    Location
    Melb
    Car:
    P1.5 460F/350R
    S P A M | W O R K S
    With our special rotational tires, it will allow you to drive very fast. - JK Tyre

  3. #3
    Member Array
    Join Date
    Jan 2013
    Location
    Brisbane, qld
    Car:
    98 ek b18cr
    Yeah. As I said. Doesn't answer my question. Just tells me to buy an ek4 loom

  4. #4
    Member Array
    Join Date
    Oct 2006
    Location
    Melb
    Car:
    P1.5 460F/350R
    Quote Originally Posted by Dyln.bxtr View Post
    Yeah. As I said. Doesn't answer my question. Just tells me to buy an ek4 loom
    its not worth anyones time trying to modify integra harness in your ek.
    you need to use ek4 or modified ej8 harness.

    integra harness is 2 piece, splits at shock tower. ej8/ek4 harness is one piece from engine all the way to ecu.
    cant use ek1 harness cos different ecu plugs and not same efi system.
    ek1 is not same as obd2a/b you see on integras and civic vtir
    S P A M | W O R K S
    With our special rotational tires, it will allow you to drive very fast. - JK Tyre

  5. #5
    Member Array
    Join Date
    Jan 2013
    Location
    Brisbane, qld
    Car:
    98 ek b18cr
    I know all that. And no one is modifying it. I am.
    My question has still not been answered

  6. #6
    Member Array
    Join Date
    Oct 2006
    Location
    Melb
    Car:
    P1.5 460F/350R
    oh ok sorry.
    i think the only difference is on the green plug near ecu.
    you have to make that plug, there should be pinouts in service manual

    not sure if anyone ever done that before lol
    Last edited by mocchi; 14-07-2013 at 02:13 PM.
    S P A M | W O R K S
    With our special rotational tires, it will allow you to drive very fast. - JK Tyre

  7. #7
    Green block gangster Array
    Join Date
    May 2004
    Car:
    twin GX160's
    Hi

    I can make you a custom loom using the D16Y4 engine harness, DC2 cabin harness and you can then run the OBDIIa and DC2 engine loom in the EK1

    PM me for more details

  8. #8
    Member Array
    Join Date
    Jan 2013
    Location
    Brisbane, qld
    Car:
    98 ek b18cr
    So I've spoken to a mate of mine. It can be done only it has to be repinned. Yay!!!
    But it's all possible aye
    Will post progress as I go.
    If you've done it before. Feel free to post any tips.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.