Page 2 of 2 FirstFirst 12
Results 13 to 17 of 17
  1. #13
    Green block gangster Array
    Join Date
    May 2004
    Car:
    twin GX160's
    sorry to say you have absolutely no chance of getting this to work unless you wire up a lot of things

    unless you know what your are doing confidently you will get frustrated very quickly

    if you want to persist then get an EM1 PGMFI schematic and wire in the ECU A connector

  2. #14
    Member Array
    Join Date
    Jan 2013
    Location
    Brisbane, qld
    Car:
    98 ek b18cr
    so i cant just use the ek4 loom as plug and play?

  3. #15
    an EK4 loom will work as it's OBD2a

    but the OBD2b loom you have won't plug and play as described above

  4. #16
    Member Array
    Join Date
    Jan 2013
    Location
    Brisbane, qld
    Car:
    98 ek b18cr
    okay cool.
    just wanted to make sure that ek4 was definitely plug and play

  5. #17
    Member Array
    Join Date
    Jan 2013
    Location
    Brisbane, qld
    Car:
    98 ek b18cr
    Thanks for the help fellas

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.