Page 1 of 2 12 LastLast
Results 1 to 12 of 17
  1. #1

    good price for 05 sway bar

    Hi guys, looking for an upgraded sway bar for my 05 Euro, cant seem to find any price parity? does anyone know where the good deals are in NSW? or happy to buy online?

    Any help will be much appreciated!

    In return can do a before/after video?

  2. #2
    C'mon guys has anyone got a sway bar on their euro?

  3. #3
    Member Array
    Join Date
    Mar 2013
    Location
    Perth NoR
    Car:
    S2k + CBX250
    rear or front?

    i see someguys use comptech and whiteline.

    whiteline is 18mm apparantly not bad,

    comptech is 22mm and the have been reported to break the mounts since they are too stiff.

  4. #4
    Member Array
    Join Date
    Aug 2008
    Location
    Melbourne
    Car:
    '96 Prelude VTi-R ATTS
    Progress 22mm comes with new mounts doesn't it?

    Anyway, cheapest would probably be OEM TL bars? At least the bars themselves are cheap, but obviously shipping wouldn't be.

  5. #5
    Member Array
    Join Date
    Mar 2013
    Location
    Perth NoR
    Car:
    S2k + CBX250
    The mounts are on the subframe i dont think they are replaceable since they are welded on. unless you replace the whole subframe, i think u can only beefen it up
    can you find a pic of the New Mounts?

  6. #6
    Member Array
    Join Date
    Aug 2008
    Location
    Melbourne
    Car:
    '96 Prelude VTi-R ATTS
    Could be wrong, just recall reading something about drilling.

  7. #7
    OEM tl bar? That's an Acura model isn't it?

    Fits euro?

  8. #8
    Member Array
    Join Date
    Aug 2008
    Location
    Melbourne
    Car:
    '96 Prelude VTi-R ATTS
    Yes. TL Type S rear is 20mm and the standard is 17mm. Believe the fronts also fit, however the bolts are 12mm instead of 10mm. Both fronts are 27.2mm with the Type S being solid and the standard being hollow. The bars themselves are only US$40 or so each for the solid ones.

  9. #9
    Mate thanks so much you're a genius! Now where to buy....?

  10. #10
    Oh and what year(s) of tl

  11. #11
    Member Array
    Join Date
    Aug 2008
    Location
    Melbourne
    Car:
    '96 Prelude VTi-R ATTS
    20mm Rear Bar: 52300-SEP-A11
    17mm Rear Bar: 52300-SEP-A03
    27.2mm Solid Front bar: 51300-SEP-A21
    27.2mm Hollow Front bar: 51300-SEP-A01

    Also need brackets, bushes, etc. and you might also want to get the updated rear endlinks. These come standard on facelift models?

    For the front, as I said the TL uses 12mm bolts where as the Euro uses 10mm, so either need to use TL endlinks and drill out the mounts to 12mm or use some kind of press on washers on the bar for 10mm bolts. Also supposed to be a bitch to install. Where as the rear just requires bending an exhaust hanger.

    Heeltoe sell them. Otherwise use the part numbers, but you might have trouble with shipping outside of the US.

    Lots of info here:
    http://tsxcore.blogspot.com.au/2011/...bar-on-04.html

  12. #12
    wow thanks mate!

    genuinely helpful, if you had a feedback form i would definitely recommend you!

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.