Results 1 to 9 of 9
  1. #1

    ecu wiring diagram?

    Hi guys I'm getting 2 aftermarket gauges installed into my car and the auto electrician has asked me to supply an 'ecu pin wiring diagram' for my car. Any idea how I can get this? My car is a 96 accord.

    Cheers

  2. #2
    Member Array
    Join Date
    Jun 2012
    Location
    Perth
    Car:
    CD5 & GE6
    Should really come and join OzAccord.net/forum
    What gauges are you putting in?
    You've gone through more accords than I changed underwear this month! - Sugz

    www.OzAccord.net/forum

  3. #3
    Member Array
    Join Date
    Jun 2012
    Location
    Perth
    Car:
    CD5 & GE6
    You've gone through more accords than I changed underwear this month! - Sugz

    www.OzAccord.net/forum

  4. #4
    Thanks mate you're a champ! Installing an oil pressure and oil temperature gauge. Might add a voltage gauge later down the track if I feel I need it

  5. #5
    Member Array
    Join Date
    Jun 2012
    Location
    Perth
    Car:
    CD5 & GE6
    Fair enough for the oil pressure and temp gauge
    I'm sure you can piggy back the connectons from the back of the block instead of at the ecu
    Voltage gauges
    http://www.ebay.com.au/itm/12-24V-LE...bdcc09a&_uhb=1

    plug it into your cigarette light socket


    Curious why the oil gauges for?
    You've gone through more accords than I changed underwear this month! - Sugz

    www.OzAccord.net/forum

  6. #6
    I have an oil leak in my car which I wanted to monitor but also I'm getting some head work done soon and wanted to make sure my car was at normal operating temp before I decide to put a bit more for force on the accelerator. Just mainly for monitoring purposes

  7. #7
    Member Array
    Join Date
    Jun 2012
    Location
    Perth
    Car:
    CD5 & GE6
    Ahh find out where the oil leak came from?
    Some obvious places are
    dizzy o-ring, valve cover or vtec solenoid
    You've gone through more accords than I changed underwear this month! - Sugz

    www.OzAccord.net/forum

  8. #8
    I found the leak to be coming from the oil sump, seems like its a big job to do/hard to get to

  9. #9
    Member Array
    Join Date
    Jun 2012
    Location
    Perth
    Car:
    CD5 & GE6
    Oil sump?
    Remove ehaust
    A few mounting bolts under the transmission - if auto
    And change the sump gasket
    You've gone through more accords than I changed underwear this month! - Sugz

    www.OzAccord.net/forum

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.