Page 3 of 3 FirstFirst 123
Results 25 to 33 of 33
  1. #25
    Member Array
    Join Date
    Aug 2005
    Location
    Melbourne - Westside M*th
    Car:
    96 Integra
    Nah I got it as a bare shell, and included in the brakes and wiring because I had them lying around. That boot though is from my own itr and still has the i-Vtec sticker on the rear window

  2. #26
    Member Array
    Join Date
    Jul 2012
    Location
    Busselton, WA
    Car:
    DECF28R & JB627
    Quote Originally Posted by eLtrix View Post
    Lols.

    Been trying to work out wiring.

    Wiring = headfk
    pm mocchi
    SSpamily

  3. #27
    Member Array
    Join Date
    Apr 2012
    Location
    Melbourne, S.E Suburbs
    Car:
    05 DC5S
    Quote Originally Posted by cbauto View Post
    pm mocchi
    He wont reply to my calls <\3
    Into Gundam and Anime?! Check out my business at www.facebook.com/officialgundamuniverse

    www.gundamuniverse.com.au

  4. #28
    Member Array
    Join Date
    Apr 2012
    Location
    Melbourne, S.E Suburbs
    Car:
    05 DC5S
    Started to strip my interior harness wire! Need help on a few things if anyone can!

    https://drive.google.com/file/d/0Bwr...it?usp=sharing
    https://drive.google.com/file/d/0Bwr...it?usp=sharing

    Would anyone know what these plugs plug into? The first pic is from the front driver side, part of the headlight loom.
    I have a feeling this one is for the radiator fan possibly and horn?
    Second pic is of the passenger side, part of the headlight loom also!
    For this I think it is front and rear washer motor and AC.

    EDIT:

    Also for this third pic if anyone know what these 4 plugs are for.
    https://drive.google.com/file/d/0Bwr...it?usp=sharing

    Wondering what the brown and grey plugs into. The green has 2 small blue connectors inside and the grey plug that is strapped onto the wiring loom.

    I have a feeling that one of these plug into the ac or blower kind of thing thats under the dash. These plug lie roughly just under the glove box near the ecu plugs!

    EDIT2:

    1.https://drive.google.com/file/d/0Bwr...it?usp=sharing
    Rough Location: Driver sides strut tower.
    Comments: I know the big connector goes to the engine loom harness but what are the other two?

    2.https://drive.google.com/file/d/0Bwr...it?usp=sharing
    Rough Location: Under driver side dash, near the fuse box.
    Comments: I'm assuming the orange is for ABS but not sure about the other three again for this set.

    3. https://drive.google.com/file/d/0Bwr...it?usp=sharing
    Rough Location: Same as number 2, under the driver side dash
    Comments: . Connected to the fuse dash set of wires.

    4. https://drive.google.com/file/d/0Bwr...it?usp=sharing
    Rough Location: No Idea
    Comments: No idea what this is for. Found it extra wondering what this extra loom is for.

    5. https://drive.google.com/file/d/0Bwr...it?usp=sharing
    Rough Location: Under driver side dash, near the fuse box. Part of the interior harness.
    Comments: No idea what this is for.
    Into Gundam and Anime?! Check out my business at www.facebook.com/officialgundamuniverse

    www.gundamuniverse.com.au

  5. #29
    Member Array
    Join Date
    Apr 2012
    Location
    Melbourne, S.E Suburbs
    Car:
    05 DC5S
    It's been quite some time since I've done an update and thought it's about time I did since quite a few things have been done.

    Firstly I've sorted out all my wiring issues and did a completely wire tuck. Routed the headlight loom and such into the fenders. Stripped out and de-pinned all the plugs I didn't need for the k-swap such as the A/C, heater, blower motor, stereo, clock, side mirror adjusters and a the speakers.

    After that when we took off the existing brakes we found that the previous owner had broken off the hard brake line that runs from the prop valve to the rear. So recently acquired one of those for a dc2r wreck, dropped the subframe and changed the lines over. While we took the brakes off we took off all suspension parts, to get new bushings pressed in! Thanks to a fellow clubitr member got a hard race bushing kit for the dc2r and got the front LCAs, front compliance arms, rear lca, rear toe arms and rear trailing arm. Hopefully the car will feel a lot better with brand new bushings!

    While I was in the process of doing all this suspension work I thought I may as well finish off the rest since I found great bargain on these... I bought hard race front and rear camber arms AND zeal function x coil overs. These however have not been installed yet but will be soon hopefully!

    That's it about this stage as I'm doing this very slowly when I get some spare time! Hopefully will get pictures up of anything I can soon!
    Into Gundam and Anime?! Check out my business at www.facebook.com/officialgundamuniverse

    www.gundamuniverse.com.au

  6. #30
    Member Array
    Join Date
    Jul 2012
    Location
    Busselton, WA
    Car:
    DECF28R & JB627
    Zeal ftw.

    Not like buddyclub which some people are running.

    You know who u r
    SSpamily

  7. #31
    Member Array
    Join Date
    Oct 2004
    Location
    www.alibaba.com
    Car:
    porsche boxster
    BC BR very good

    track proven many time

  8. #32
    Member Array
    Join Date
    Jul 2012
    Location
    Busselton, WA
    Car:
    DECF28R & JB627
    Track proven not enuf. Must be best in market.
    SSpamily

  9. #33
    Only a half full of coils I would run. BC and buddy club are not one of them. Zeal how ever are
    Import Performance and Styling
    -= Official distributors for Password JDM =-

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.