Page 1 of 2 12 LastLast
Results 1 to 12 of 20
  1. #1
    Member Array
    Join Date
    Jan 2014
    Location
    Sydney
    Car:
    '98 INTEGRA

    Question DC2 Performance Mods?

    I have a '98 DC2 Vtir. I have big plans for the interior and exterior cosmetics, but I don't have any plans for the performance of the car.

    I was wondering what modifications / upgrades are recommended for noticeable performance enhancement?

    My car is near stock, I only have a basic after market exhaust from the cat to tip, slightly lowered on dampening adjustable coil overs and a strut bar in the engine bay.

    All suggestions are welcome

    Thanks in advanced

  2. #2
    Ozhonda Trader Array
    Join Date
    Dec 2012
    Location
    Adelaide
    Swap your final drive ratio for something like a DC2R 4.78 or aftermarket 4.9:1. Best bang for buck without a doubt, most noticeable mod short of a turbo kit.
    Specialised Gearbox and Differential Repairs and Upgrades
    Genuine Honda Parts
    PPG, MTEC, DIMPLE
    neatgearboxes.com.au
    facebook.com/neatgearboxes

  3. #3
    Member Array
    Join Date
    Oct 2006
    Location
    Melb
    Car:
    P1.5 460F/350R
    lightweight flywheel
    S P A M | W O R K S
    With our special rotational tires, it will allow you to drive very fast. - JK Tyre

  4. #4
    Member Array
    Join Date
    Jul 2012
    Location
    Busselton, WA
    Car:
    DECF28R & JB627
    pm Vvvtec
    SSpamily

  5. #5
    Member Array
    Join Date
    Jan 2010
    Location
    PnP Garage
    Car:
    BREEZE
    K24 engine hehe

    +1 for 4.9fd. Will totally wake that motor up from its slumber
    part time potato

  6. #6
    Member Array
    Join Date
    May 2010
    Location
    Melbourne
    Car:
    2000 DC2R
    Flywheel + final drive will make u roll other dc2s with every bolt on
    3 guys walk into a bar. The first guy told the D to get a B series.The second guy told the B to get a K series. The last guy told the K to fk off just get a V8 mate.

  7. #7
    Member Array
    Join Date
    May 2010
    Location
    Melbourne
    Car:
    2000 DC2R
    Plus you'll flyby sounding stock win win sleeper
    3 guys walk into a bar. The first guy told the D to get a B series.The second guy told the B to get a K series. The last guy told the K to fk off just get a V8 mate.

  8. #8
    Member Array
    Join Date
    Jan 2014
    Location
    Sydney
    Car:
    '98 INTEGRA
    So flywheel and final drive seem to be the best suggestion. best suggestion for where to get one?

  9. #9
    Member Array
    Join Date
    Jul 2012
    Location
    Busselton, WA
    Car:
    DECF28R & JB627
    b20b8
    SSpamily

  10. #10
    Member Array
    Join Date
    Jan 2014
    Location
    Sydney
    Car:
    '98 INTEGRA
    unfortunately not doing an engine swap yet

  11. #11
    Member Array
    Join Date
    May 2010
    Location
    Melbourne
    Car:
    2000 DC2R
    Ebay will be your cheapest bet, but look for reputable brands. Don't wanna pay labour for a gearbox twice
    3 guys walk into a bar. The first guy told the D to get a B series.The second guy told the B to get a K series. The last guy told the K to fk off just get a V8 mate.

  12. #12
    Ozhonda Trader Array
    Join Date
    Dec 2012
    Location
    Adelaide
    I can supply what you need - pm if interested.
    Specialised Gearbox and Differential Repairs and Upgrades
    Genuine Honda Parts
    PPG, MTEC, DIMPLE
    neatgearboxes.com.au
    facebook.com/neatgearboxes

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.