Page 1 of 2 12 LastLast
Results 1 to 12 of 21
  1. #1

    EK1 Beast [EK9 Type R Replica]

    After owning a BB6 and an 04 EP3r which was written off last month, I bought an EK. Not your average EK though.

    This thing was built by Dan from Honda Dynamics and not a lot of coin was spared, over 15 grand was put into the engine.

    After my EP3 getting written off, I was going to make an EG k20, until I found this.. So until I sell it, it sits in the shed like this.. (can't make a sale thread yet)


    Last dyno made 163kw and 528nm of torque, it's going to Graham West again on Monday for another tune, when it gets out the paint shop this week. Getting it cut and polished, touched up over the body and removing some carbon vinyl wrap that was on it. I brought the car to work, put it up on the hoist and had a look through it all and when we went for a drive, I was sold at the vtec crossover.

    This is it..



    Mods list:

    Engine:
    B16b engine with BC stroker kit 2.2L 95mm lightened
    Crank with customized long ration rod & 84mm bore size piston
    Compression ratio is 11.7
    Skunk2 pro Stage3 cams set (exhuast and intake)
    Skunk2 pro valve and Skunk2 titanium retainer
    Skunk2 pro intake manifold and Skunk2 70mmTB
    Skunk2 pro titanium cams gear
    Toda racing Timing belt
    Darton MID sleeve Cometic Head Gasket 84mm
    ARP 208-4303 Head Stud
    NGK laser Platinum spark plugs and leads
    J's Racing Thermostat
    Silicone Heater Radiator hose
    Koyo R1570 radiator & 1.3 Bar Cap
    K&N Typhoon induction kit
    Skunk2 Alpha Series Header
    Xforce high flow cat
    Xforce twinloop cat back exhaust

    Fuel:
    AEM 25-100Bk Fuel Rail & Reg
    Precision Injectors 780cc
    AER 11142-Aeromotive Fuel Pump 340lph

    ECU:
    30-6040 - AEM series 2 Plug-n-play Engine Management System
    30-2310 - AEM UEGO inline Wideband
    30-4300 - AEM Serial Gauge Datastream 19 Channel

    Trans:
    EK9 S4C LSD gearbox with 4.4FD
    Exedy Hyper Single Clutch kit
    Exedy lightweight racing flywheel
    SKK 628-05-0090-Skunk2 Short Throw Shifter

    Suspenion & Brake:
    EK9 subframe conversion
    AVID Racing Engine mount kit
    Front Strut brace
    SuperPro Bushes around
    WHITELINE BHR83XZ Sway Bar Stabiliser Kit
    Genuine EK9 Shocker
    Ek9 5 stud F&R conversion with 17/15 brake Calipers and braided lines
    Drilled and Slotted Rotors with Endless Pads

    Wheels:
    16x7" Genuine Mugen MF10
    Yokohama S-drive 80%tread
    Interior:
    Genuine EK9 Dash with double din stereo, driver side Air cond Vent
    Genuine TypeR Red carpet & floor mat
    Genuine TypeR Air bag Steering wheel
    Genuine TypeR Cluster
    Genuine TypeR Door trim, center console
    Genuine SR3 RECARO, seat in good cond, no hole etc
    Genuine TypeR gearknob & pedal
    Audio:
    Pioneer Double din dvd player
    Pioneer speaker upgrade around
    Exterior:
    Genuine TypeR front End with lip, grill etc
    Genuine EK9 tail light
    Genuine EK9 boot lid with spoiler, no wiper and dark window
    Mugen Side skirt and Rear bar

    & I still think I missed a lot of things..

    A lot of plans for it, but first it needs garage space. When it's back from the paint shop & tune I'll be sure to take a video Some people might have seen the car before, It was originally wrapped fully white and was sitting in the Honda Dynamics workshop for quite a while and some Chinese guy never picked it up. It's fully engineered with the b16b, just hoping it won't get defected Keep an eye out for it in SA

  2. #2
    Member Array
    Join Date
    Feb 2012
    Location
    Northern Beaches
    Car:
    EG Civic
    Looks very nice! cams are aggressive! definitely need more pics, it looks very clean and that's a decent mod list!
    Wakefield Park PB: 1.15.6

  3. #3
    Member Array
    Join Date
    Jan 2010
    Location
    PnP Garage
    Car:
    BREEZE
    528nm lol might want to double check that. Nice pickup though man!
    part time potato

  4. #4
    Member Array
    Join Date
    Oct 2006
    Location
    Melb
    Car:
    P1.5 460F/350R
    528nm lmaoooooooooooo

    nice car m8, how does it feel to rip through the fabric of space and time
    S P A M | W O R K S
    With our special rotational tires, it will allow you to drive very fast. - JK Tyre

  5. #5
    Member Array
    Join Date
    Jan 2010
    Location
    ACT
    Car:
    DC2
    In4 dyno graphs
    -ZAMMIN-

    "I know who you are, and I know if I make a formal complaint Mr. Benjamin will have to roll over and give me all your details"
    - Integra-GSi 19/11/2015

  6. #6
    Member Array
    Join Date
    Oct 2011
    Location
    16 Wilkins St E Annerley
    Car:
    Toyota Soarer
    In for dyno
    Users I've upset: EKVTIR-T | Renaissance_x | Integra-GSi | Stevil | vteckiller | dyln_bxtr | zedries | joyride | eren | Brian FD2R | AusS2000 | amant02 - II | CRXDEL501 | Indie | UiK | mnc | neut

  7. #7
    Member Array
    Join Date
    Sep 2011
    Location
    forever waiting
    Car:
    no weetek civic
    In4 graphs

    Graham west such a wizard he adds an extra 4 cylinders worth of power.
    SSpamily



    hehe

  8. #8
    Member Array
    Join Date
    Jan 2004
    Location
    Adelaide Hills
    Car:
    DA9T+Euro
    This is a pretty exciting car saw for sale recently and glad you've decided to share with us.

    What's first on the plans after paint?
    DA9 LS w/JDM SiR B18C turbo
    Looking for older Honda project car pre-1985


  9. #9
    Member Array
    Join Date
    Mar 2011
    Location
    Syd
    Car:
    EK
    lol 500+ torque in a civic.

    You have to divide by diff ratio in the gear the dyno was run at.

  10. #10
    Member Array
    Join Date
    Oct 2011
    Location
    16 Wilkins St E Annerley
    Car:
    Toyota Soarer
    Quote Originally Posted by Darmanin View Post
    lol 500+ torque in a civic.

    You have to divide by diff ratio in the gear the dyno was run at.
    lol fuck head he did first gear

    1 divided by 500+ = 500+
    Users I've upset: EKVTIR-T | Renaissance_x | Integra-GSi | Stevil | vteckiller | dyln_bxtr | zedries | joyride | eren | Brian FD2R | AusS2000 | amant02 - II | CRXDEL501 | Indie | UiK | mnc | neut

  11. #11
    Was a 3rd gear lol done by graham west in 2012, ive got the old one but we'll see what the new tune makes this Wednesday. On my phone now or I'd post it.

  12. #12
    Member Array
    Join Date
    Jun 2014
    Location
    Perth
    Car:
    ek Gli
    definitely mirin, keen for more pics looks sweet

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.