Results 1 to 5 of 5
  1. #1

    EK seat mounts into DC2

    Hi

    Anyone know if the EK seat mounts holes will fit directly into a DC2? I not talking about seats or seat mount types, just the bottom bracket. thanks

  2. #2
    Member Array
    Join Date
    Dec 2004
    Location
    Melbourne
    Car:
    RD7
    Not exactly.

    3 out of the 4 bolts will line up.
    Quote Originally Posted by ChargeR
    Ozhonda mods don't sleep, they wait.

  3. #3
    ok thanks. Another question then, if I get USDM PLM rails, I know the driver and passenger sides are opposite, can I just swap them around - i.e use the drivers in the passenger and passenger in the drivers side and they would work?

  4. #4
    Member Array
    Join Date
    Dec 2004
    Location
    Melbourne
    Car:
    RD7
    US/non-US doesn't matter, the floor pan is still the same.

    You'll just be using their "driver side" as your passenger side, and their "passenger side" as your driver side.
    Quote Originally Posted by ChargeR
    Ozhonda mods don't sleep, they wait.

  5. #5
    Member Array
    Join Date
    Aug 2011
    Location
    South East Melbourne
    Car:
    Civic EJ8
    Use swap inner rails technique. I used this technique to fit dc2 seats in ek.
    4/4 bolts line up

    if you look at rails, you'll see the inner rails don't line up, what you do is use the ek inner rail with the DC outer rail and 4/4 bolts will line up.
    Genius....Rad Car......why not have both?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.