Page 1 of 2 12 LastLast
Results 1 to 12 of 17
  1. #1

    Wideband o2 install and set it up to datalog to S300 for ITR

    As above

    Thanks.
    EG

  2. #2
    Member Array
    Join Date
    Feb 2011
    Location
    Geelong
    Car:
    EG4 B18CR
    Last edited by Monetz; 27-10-2014 at 06:43 PM.

  3. #3
    Thanks Monetz

    Im confused, some people say the wideband DOES NOT replace o2, but the hondata write up says about replacing it with a wideband...
    EG

  4. #4
    Member Array
    Join Date
    Feb 2011
    Location
    Geelong
    Car:
    EG4 B18CR
    is should replace because when i bought LC-2 kits from Josh Sleeping Performance is come with Bosch Nascar performance 17014 O2 Sensor but josh did all the wiring with Neptune

  5. #5
    So yours reads narrowband AND wideband? No need to weld another bung as it just fit into the stock o2 sensor spot?

    Which one you get man ?
    EG

  6. #6
    Member Array
    Join Date
    Feb 2011
    Location
    Geelong
    Car:
    EG4 B18CR
    yep everything just fits on my PLM Header no weld another bung
    this my kits http://www.innovatemotorsports.com/products/lc2.php

  7. #7
    Nice, so you dont even have a guage that displays the AFR ?
    EG

  8. #8
    You must spread some Reputation around before giving it to Monetz again.
    EG

  9. #9
    Member Array
    Join Date
    Feb 2011
    Location
    Geelong
    Car:
    EG4 B18CR
    Quote Originally Posted by infurNOS View Post
    Nice, so you dont even have a guage that displays the AFR ?
    Yes i do have guage.

    you can buy them LC-2 Wideband Kit with guage or without guage take a look at here http://www.innovatemotorsports.com/x...me.php?cat=273

    either way you can pick the colour GREEN/BLUE/RED/

    Quote Originally Posted by infurNOS View Post
    You must spread some Reputation around before giving it to Monetz again.


    hahaha all good
    Last edited by Monetz; 27-10-2014 at 11:01 PM.

  10. #10
    Member Array
    Join Date
    Nov 2009
    Location
    The Guy Next Door, Lol.
    Car:
    KSWAPPED STi -R
    From What I have read, Wide band is used as a tuning tool.

  11. #11
    Quote Originally Posted by amant02 View Post
    From What I have read, Wide band is used as a tuning tool.
    Correct.my tuner has a tailpipe sniffer which is wideband but not quite as accurate as a proper wideband as a proper one sits closer to the engine.
    EG

  12. #12
    TBH I dont even think I need a guage. As long as it is connected to the s300 and logging the wideband values in SManager ill be happy
    EG

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.