Results 1 to 7 of 7
  1. #1
    Newcomer Array
    Join Date
    Jun 2014
    Car:
    Honda Integra

    Integra Dc5 Coilover issue

    Hey I have an Honda Integra dc5 2002
    I bought buddy club coilovers off an ep3.
    The rear coils went in easy.
    But when trying to install the front coils the tie rod ends were a different size.
    Does anyone have any suggestions on how to get them on?
    Such as which tie rod ends to get?
    Where from?

    Thanks

  2. #2
    Get the dc5 end rods.

  3. #3
    Newcomer Array
    Join Date
    Jun 2014
    Car:
    Honda Integra
    Do you mean get new dc5 end rods? coz i already have dc5 rods on the car.

  4. #4
    You need the dc5 tie rod ends.

  5. #5
    Member Array
    Join Date
    Nov 2006
    Location
    Melbourne
    Car:
    DC5, EF8, EF2
    What that fellow really means is you need EP3 tie rod ends at the front (not DC5), the taper is smaller and will suit your coilovers if they were originally EP3 items.

  6. #6
    charger is right ^ you need the ep3 tie ends or else it won't work. Getting dc5 tie ends will leave you where you are exactly.

  7. #7
    Oh yeh sorry I read it all wrong. Just like the above ppl have said, you need the tie end rods that match the coilovers that you have.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.