Page 2 of 3 FirstFirst 123 LastLast
Results 13 to 24 of 31
  1. #13
    Member Array
    Join Date
    Mar 2014
    Location
    Mexico
    Car:
    Rolla Sportivo
    Quote Originally Posted by Jasemas View Post
    Or they'll need to be removed from the car and flow tested & cleaned
    Good idea. Once I get a video or even get a long screw driver to the injectors and valve cover, I'll find out where the sound is coming from.

    I used the screw driver method to find a sound that was actually the power steering pump, in which it was replaced.
    Lived the Prelude Life 13/11/13 - 15/09/15
    My 1998 B-84P Prelude VTi-R
    Now living Getz with Lift life - 05 Corolla Sportivo - Standard Sportivo Mod Shiz

  2. #14
    Member Array
    Join Date
    Mar 2014
    Location
    Mexico
    Car:
    Rolla Sportivo
    UPDATE:

    No video but I am getting a valve adjustment this week.
    Lived the Prelude Life 13/11/13 - 15/09/15
    My 1998 B-84P Prelude VTi-R
    Now living Getz with Lift life - 05 Corolla Sportivo - Standard Sportivo Mod Shiz

  3. #15
    Member Array
    Join Date
    Jun 2012
    Location
    Perth
    Car:
    CD5 & GE6
    Sick
    Just make sure it's done on a 'stone cold engine'
    i.e left over night
    You've gone through more accords than I changed underwear this month! - Sugz

    www.OzAccord.net/forum

  4. #16
    Member Array
    Join Date
    Mar 2014
    Location
    Mexico
    Car:
    Rolla Sportivo
    Quote Originally Posted by Jasemas View Post
    Sick
    Just make sure it's done on a 'stone cold engine'
    i.e left over night
    What happens if it isn't?
    Lived the Prelude Life 13/11/13 - 15/09/15
    My 1998 B-84P Prelude VTi-R
    Now living Getz with Lift life - 05 Corolla Sportivo - Standard Sportivo Mod Shiz

  5. #17
    Member Array
    Join Date
    Jun 2012
    Location
    Perth
    Car:
    CD5 & GE6
    Quote Originally Posted by Squalled View Post
    What happens if it isn't?
    The valve adjustment readings will be inaccurate
    And you may over tighten a valve & burn it up
    Honda's need to be adjusted stone cold
    You've gone through more accords than I changed underwear this month! - Sugz

    www.OzAccord.net/forum

  6. #18
    Member Array
    Join Date
    Nov 2009
    Location
    The Guy Next Door, Lol.
    Car:
    KSWAPPED STi -R
    Wut fuel have you been using? If you mostly fill up 98 i doubt its the injectors.

    It has to be done cold as metal expands/distorts with temp. It even says it on the sticker on the bonnet. What clearance it should be on both sides.

    Having bad clearances can leave you broken down. I've been there, don't let it go for too long.

  7. #19
    Member Array
    Join Date
    Oct 2011
    Location
    16 Wilkins St E Annerley
    Car:
    Toyota Soarer
    Quote Originally Posted by amant02 View Post
    Wut fuel have you been using? If you mostly fill up 98 i doubt its the injectors.

    It has to be done cold as metal expands/distorts with temp. It even says it on the sticker on the bonnet. What clearance it should be on both sides.

    Having bad clearances can leave you broken down. I've been there, don't let it go for too long.
    Injectors go even if you use 98 you ning nong
    Users I've upset: EKVTIR-T | Renaissance_x | Integra-GSi | Stevil | vteckiller | dyln_bxtr | zedries | joyride | eren | Brian FD2R | AusS2000 | amant02 - II | CRXDEL501 | Indie | UiK | mnc | neut

  8. #20
    Member Array
    Join Date
    Mar 2011
    Location
    melb
    Car:
    BB6
    any update on the valve adjustment? how much did it cost you?
    come at me bro

  9. #21
    Member Array
    Join Date
    Mar 2014
    Location
    Mexico
    Car:
    Rolla Sportivo
    I only run 98.

    Quote Originally Posted by bonie002 View Post
    any update on the valve adjustment? how much did it cost you?
    For some reason, my car was getting other things fixed also and it never got a valve adjustment. I'm now looking for places other then Honda that would actually do it.

    I have since decided to service my car myself after I got it back twice with issues (loose wheel nuts first, then a vacuum leak).
    Lived the Prelude Life 13/11/13 - 15/09/15
    My 1998 B-84P Prelude VTi-R
    Now living Getz with Lift life - 05 Corolla Sportivo - Standard Sportivo Mod Shiz

  10. #22
    Member Array
    Join Date
    Oct 2011
    Location
    16 Wilkins St E Annerley
    Car:
    Toyota Soarer
    Yh diy best
    Users I've upset: EKVTIR-T | Renaissance_x | Integra-GSi | Stevil | vteckiller | dyln_bxtr | zedries | joyride | eren | Brian FD2R | AusS2000 | amant02 - II | CRXDEL501 | Indie | UiK | mnc | neut

  11. #23
    Member Array
    Join Date
    Mar 2014
    Location
    Mexico
    Car:
    Rolla Sportivo
    Quote Originally Posted by RenzokukenJ View Post
    Yh diy best
    Gotta love the DIY
    Lived the Prelude Life 13/11/13 - 15/09/15
    My 1998 B-84P Prelude VTi-R
    Now living Getz with Lift life - 05 Corolla Sportivo - Standard Sportivo Mod Shiz

  12. #24
    Member Array
    Join Date
    Mar 2014
    Location
    Mexico
    Car:
    Rolla Sportivo
    Update: Have got a screw driver and placed it pretty much above my headers near the valves and I can hear the noise quite clearly.

    I put it on the valve cover and couldn't hear it as much.

    The noise is getting louder and I believe now and adjustment won't fix this issue.
    Lived the Prelude Life 13/11/13 - 15/09/15
    My 1998 B-84P Prelude VTi-R
    Now living Getz with Lift life - 05 Corolla Sportivo - Standard Sportivo Mod Shiz

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.