Results 1 to 6 of 6
  1. #1
    Newcomer Array
    Join Date
    May 2014
    Location
    Melbourne
    Car:
    honda

    s2000 wheel fitment

    hey guys, in the near future i will be purchasing wheels for my s2k. i was looking at ce28ns. 17x9 +63 with 245 tires at the front and 17x9 +40 with 255 tires in the rear. guards have been rolled. will i need any camber adjustments if i get these set of wheels?? i dont want to rub!!! but on extreme cornering i dont mind.
    Hope you can help!! thanks guys

  2. #2
    Those are very decent specs i think you will get away with it.

  3. #3
    Member Array
    Join Date
    Dec 2008
    Location
    835 Beaufort St
    Car:
    hondie 2000
    I am running 17x9+63 and it's a bit sunken. scrapes against the control arm up ramps and stuff.
    S P A M | W O R K S
    hehe.
    PHC


  4. #4
    Newcomer Array
    Join Date
    May 2014
    Location
    Melbourne
    Car:
    honda
    are you running 17x9 +63 square?? what tyre size are you running??

  5. #5
    Member Array
    Join Date
    Dec 2008
    Location
    835 Beaufort St
    Car:
    hondie 2000
    i went 235 front and 245 to preserve a bit of stagger.. Dunno if this really a good idea but it handls alright, albeit a bit numbly compared to the stock tyres
    S P A M | W O R K S
    hehe.
    PHC


  6. #6
    Newcomer Array
    Join Date
    May 2014
    Location
    Melbourne
    Car:
    honda
    oh okay, do you reckon i would need camber adjustments if i went 17x9 +40 in the rear with 255 tyres?? or will just need a good roll and maybe a tad flare??

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.