Results 1 to 3 of 3
  1. #1

    Replace mode buttin with PLX guage

    Thinking of putting a wideband/boost guage in place of the mode button.

    Has anyone done this?

    And is anyone familiar with the PLX range. I like the fact that you can have have up to 16 different sensor modules & have them all display on a single gauge.


    http://www.plxdevices.com/Wideband-O...7346002719.htm

  2. #2
    Member Array
    Join Date
    Dec 2008
    Location
    835 Beaufort St
    Car:
    hondie 2000
    I have an AEM serial gauge installed there. Going to replace it since i don't have the AEM ECU anymore.
    S P A M | W O R K S
    hehe.
    PHC


  3. #3
    I found some good reviews & posts on these so i decided to buy a DM6 wideband combo & a boost sensor module.

    I got them from the local distributor http://plxdevices.com.au/ & will hopefully have them by the weekend.

    Will post a picture (If its a successful install)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.