Results 1 to 5 of 5

Thread: B16 Box in H2B

  1. #1
    Newcomer Array
    Join Date
    Mar 2012
    Location
    Sydney, Australia
    Car:
    EM1

    B16 Box in H2B

    Planning to do a H2B swap. Already have a s4c from a b16, but was wondering is the box strong enough with withstand the torque from the h22? The car will not be modified heavily just a raised compression/stock airbox/stock headers/exhaust/etc. very light modification. Discussed this with someone and they said the box will break, is this true? If the box is used an mfactory lsd would be installed.

  2. #2
    Member Array
    Join Date
    Sep 2011
    Location
    forever waiting
    Car:
    no weetek civic
    you ever had some spice and the next morning a little effort was required to get things going. thats a b16 box with a b16

    then one day you decide you're gonna go all out and down the hottest chilli or food you can find. next day you decimate your rear end. it'll never be the same but you can handle it. thats a b16 box with a h22.
    SSpamily



    hehe

  3. #3
    Newcomer Array
    Join Date
    Mar 2012
    Location
    Sydney, Australia
    Car:
    EM1
    i guess ill be saving up for a type r box LOL

  4. #4
    mate people turbo b16s and the box is OK.
    A 2.2 should be fine

  5. #5
    Ozhonda Trader Array
    Join Date
    Dec 2012
    Location
    Adelaide
    It'll probably be alright - the pinion will find it hard to hold together in a tired old box though.
    Specialised Gearbox and Differential Repairs and Upgrades
    Genuine Honda Parts
    PPG, MTEC, DIMPLE
    neatgearboxes.com.au
    facebook.com/neatgearboxes

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.