The Honda Accord Euro CU2 is a popular mid-sized passenger vehicle released back in June 2008. The CU2 Accord Euro is powered by a 2.4 litre four cylinder petrol engine (K24Z3) which features Honda’s technology i-VTEC. It is available with a six speed manual transmission or a five speed automatic which allows the driver to select gears with the “paddle shifters” to adapt with different driving scenarios such as driving down and up hills.



In the braking department the CU2 Accord Euro is fitted with 320 mm by 32 mm vented front brake discs and 305 mm by 9 mm solid rear discs.



Bendix General CT are a general purpose disc brake for passenger vehicles such as the Honda Accord Euro CU2 and is specifically suited for general suburban, city and freeway driving. The Bendix General CT pads have been designed to tackle the issues consumers dislike most such as noise and dust but without compromise to stopping performance.

The General CT Brake Pads keep both dust and noise to a minimum through OE geometry and material composition. Low quality pads may cost less than General CT but what is the cost of safety and reliability? General CT provides enhanced durability, reduced fade and improved stopping performance.



NEED HELP CHOOSING THE RIGHT BRAKE PAD?

Bendix has specifically manufactured General CT Brake Pads to suit the Honda Accord Euro 2009 – NOW. The below part numbers are the correct replacement parts for you to replace your brake pads.



Front Brake Pads – Part No: DB2118

Fits: Honda Accord Euro 2.4 CU2 June 2008 - NOW

Set consists of Left and Right Inner + 2 Outer Pads



Rear Brake Pads – Part No DB1728

Fits: Honda Accord Euro 2.4 CU2 June 2008 - NOW

Set consists of LH Inner + RH Inner + 2 Outer Pads

Available from your local Bendix stockist. Locate your nearest stockist here: www.bendix.com.au/stockists