Page 2 of 3 FirstFirst 123 LastLast
Results 13 to 24 of 35
  1. #13
    Member Array
    Join Date
    Feb 2006
    Location
    in a tree
    Car:
    Civic
    pretty much the same method for EK

  2. #14
    Member Array
    Join Date
    Apr 2006
    Location
    I'm here right now
    Car:
    JDM K20A
    EK got 4 different kinds of clips *DOH!*

  3. #15
    Member Array
    Join Date
    Jul 2007
    Location
    Brisbane
    Car:
    2000 Civic EK
    Just consolidating some information for the next person-
    http://www.honda-tech.com/zerothread?id=774737 (link courtesy of pchio)

    Most of the pics are gone, but this info may be useful. The first and last one are B's, these screw into the door frame. Screw goes into the door, and catches the B clip on the other side. Took me a while to figure out.

    After that you've got H, F and D, in between all the B's as per:


    where H is next to the higher B, F is the middle one, and D is the one next to the lower B.

    *Of course, you're prolly looking up at the picture going 'duh mate'- but yeah.. putting it in text in case the picture hosting dies, like for the subsequent pictures in in that link.

    Have fun!
    Last edited by Ry_; 14-08-2007 at 12:42 PM.

  4. #16
    Member Array
    Join Date
    Apr 2006
    Location
    I'm here right now
    Car:
    JDM K20A
    yeah, finally figured it out after prying the weatherseal

    anyway, +1 rep for the info!

  5. #17
    Member Array
    Join Date
    Jul 2006
    Location
    in a galaxy, far far away...
    Car:
    17 HR-V VTi-S
    yeah just put on my visors.
    i find the two side B brackets are hard to clip onto the visor as its screwed onto the car.

  6. #18
    Member Array
    Join Date
    Jan 2005
    Location
    Caloundra, Sunshine coast
    Car:
    EK sedan
    so confusing ek is way diffrent i pretty much have to force clips into place? then screw alot what clips are for what doors? 2 difretn kinds?
    not being a smart ass... but is that what vtec feels like? turning the aircon off?

  7. #19
    Member Array
    Join Date
    Apr 2006
    Location
    I'm here right now
    Car:
    JDM K20A
    Quote Originally Posted by nugget666 View Post
    so confusing ek is way diffrent i pretty much have to force clips into place? then screw alot what clips are for what doors? 2 difretn kinds?
    you gotta silghtly pry the bailey channel. (but DO NOT pry the whole thing) and put the clips in place according to the shape of the door frame.

    and then put the channel back on, the channel should hold the clips in place.

  8. #20
    Member Array
    Join Date
    Jan 2005
    Location
    Caloundra, Sunshine coast
    Car:
    EK sedan
    ahh ok kinda makes send got to pry them right in ok i wasnt 100%. but will try again tomorrow thanks
    not being a smart ass... but is that what vtec feels like? turning the aircon off?

  9. #21
    Member Array
    Join Date
    Apr 2006
    Location
    I'm here right now
    Car:
    JDM K20A
    yeah, what I did is pry the section that I want to position the clip one by one, its safer that way. rather than prying the whole upper channel at once.

  10. #22
    Member Array
    Join Date
    Jan 2009
    Location
    AUSTRALIA
    Car:
    EK-F00L
    im having problems with my visor, the clip i assume to be diffrent to the ones shown, and as i tryed the method, it wont stay its like loose

    here are pics :









    compared to your's





  11. #23
    Newcomer Array
    Join Date
    Dec 2008
    Location
    Sydney
    Car:
    EG VTI
    Good stuff! Very detailed explanation and diagrams. Did mine in under an hour. Thanks!

  12. #24
    Member Array
    Join Date
    Jul 2005
    Location
    Western Sydney
    Car:
    94 EG, 11 Maloo
    anyone wana help me put mine in? ill pay ya?
    Power Of Dreams...
    VTECN

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.