DC2R Swaybars

**chee** · 07-09-2006 01:31 PM

Hi guys just wondering how big is the DC2R f&r sway bars? The thread in the faq doesn't specify what size they are.

And what would need to be changed to fit a DC2R front oem sway bar and a cusco dc2r rear sway bar to a dc2 vtir?

**frahmy** · 07-09-2006 01:51 PM

not sure bout the front stock one but with the cusco, im not 100% sure but they mite just be the same as dc2, but u should just get the ones that fit dc2 as they r gonna pretty much b the same as dc2r, any differences would just be fitting.

**chee** · 07-09-2006 02:20 PM

cusco only lists dc2r. and its a 25mm sway. i was looking for a 22mm sway to match the front 24mm but im interested to see how big the front itr one is.

**frahmy** · 07-09-2006 03:08 PM

ahk.
i just orded a whiteline 22mm rear sway from trav, they r sposed to be really good.

**kayot1k** · 07-09-2006 04:43 PM

mate why dont you opt a 23mm jdm itr rear sway from jdmyard. !
he supplies them brand new.

its very hard to find oem itr 22mm rear sway nowadays.

rear 25mm rear sway is overkill yo.

**EG5** · 07-09-2006 04:54 PM

you need reinforcement kit to be able to install your rear 22- 23mm sway bar
we sell beaks reinforcement kit

**Paul1985** · 07-09-2006 05:22 PM

i got 23mm rear and 25mm front in my EG. Both JDM ITR.

you can get 22mm rear and 24mm front in ITR's aswell.
And EG5 is correct, you need some reinforcement

**kayot1k** · 07-09-2006 05:32 PM

dont mean to hi-jack but anyone know of any issues with ek with 22mm rear itr bar ?
i've fitted mine on for about almost 2weeks now and no dramas but i noticed one of me endlinks is touching my strut on the left hand side of the car.
it looks like its grazed it a few times also ?
anyone know how i can fix this ? by the way its not a standard strut. so it is abit fat compared to stock.

my endlinks (both) are up and down very close if not perpendicular to the lca's im pretty sure thats the preferred setup for the sway bars to get them working propley ?