where to get Breakpads and Rotors

**Victor1982** · 07-03-2007 06:21 PM

got rotor machined under warranty @25000. now my car has done 43000. it is wrapped again..... do not want to go back to dealers....they never help. so I am after some after market break pads and rotor. for the rotor. I am thinking about to buy the DBA oem replacement rotors. F&B and Break pad. is EBC good for daily driving ? and most importantly. where Can I buy it? cheers

**mugen88** · 07-03-2007 06:26 PM

Check dba website would be a good start, I think u can buyem almost anywhere. Google EBC for dealers.

FYI there r a set project mu front rotors in the for sale section, they look tasty.

**Drew** · 07-03-2007 06:34 PM

I would strongly advise against EBC

**curik** · 07-03-2007 06:47 PM

DBA rotors are good rotors and you would never go wrong with them. As with the pads, there are Axxis pads. Mugen88 has them so you can ask him how they perform. If you want JDM, Endless VN9500 are good for a better performance than OEM, pricewise should be around 300 for F+R. Endless is a reputable brand and makes very good brake pads. To buy them? There are some traders selling Endless pads, just type 'endless' on the traders section.

**Victor1982** · 07-03-2007 06:50 PM

thank you very much indeed

**tony1234** · 07-03-2007 07:23 PM

Originally Posted by Victor1982

got rotor machined under warranty @25000. now my car has done 43000. it is wrapped again..... do not want to go back to dealers....they never help. so I am after some after market break pads and rotor. for the rotor. I am thinking about to buy the DBA oem replacement rotors. F&B and Break pad. is EBC good for daily driving ? and most importantly. where Can I buy it? cheers

Try changing just the pads first as the OEM pads tend to leave deposits on the rotors which gives the impression that they need machining.Get a good pad like Endless VN9500 and i'm sure you'll find that they will get rid of those deposits the more you use them.I think Underground Imports(Egsi) has fronts for $160.00.i've bought stuff from him he's a good guy.

**Rasputin** · 07-03-2007 07:29 PM

Originally Posted by Drew

I would strongly advise against EBC

Any reason in particular?

**Drew** · 07-03-2007 07:36 PM

As per my posts at the bottom of Page 1 and some where on Page 2

http://www.ozhonda.com/forum/showthread.php?t=61133

**TypeG** · 07-03-2007 09:25 PM

i will never use DBA and EBC stuff

go Endless and project Mu

**tony1234** · 08-03-2007 06:30 AM

Originally Posted by TypeG

i will never use DBA and EBC stuff

go Endless and project Mu

What's wrong with DBA?Have you had problems?I've only heard good things about them.

**panda[cRx]** · 08-03-2007 06:44 AM

when you had your discs machined by the dealer they should have replaced the pads as well which are a revised compound (from what i'm told) as there have been a few problems with euro discs warping in the past

as for where, i'm sure if u wack a post up here u'll have a few people trying to flog them too you http://www.ozhonda.com/forum/forumdisplay.php?f=84