JDM HUB for DC5

[mikoZ]

is there anyone change the JDM hub kits on dc5, how u guy feel after changed ... its much more safe way than change spacers
i will install endless brake system on my car and what i need to do is change the hub kits to the JDM one or put on the spacers

[air23box]

you may need knuckles LCA and the hub.......can someone confirm this?

[vincent]

You will need the whole FRONT END
i.e
Swaybar
Knuckle / HUB Assy
LCA
ROTORS

To maintain vehicle balance, You will then need to change the REAR END
LCA
REAR Knuckle / Hub

If you are going to change to ENDLESS brakes, Why not just get the right kit that bolt straight on to AUDM (i.e Your car) instead of JDM?. There won't be any difference in pricing assuming you are buying the kit new.

[mikoZ]

i perfer to buy the ENDLESS one, hehe~

[DC5TYPER]

I would rather stay with AUDM setup and get a AP Racing kit from race brakes.

Thats another Idea.

[kongfu]

you may need knuckles LCA and the hub.......can someone confirm this?

Eddie is correct.

[mikoZ]

sry guys, there something i miss, the hub kit will comin with the kunckles LCA, sway, and hub assy, that the full kit from honda.jp
i dun have experience of that, so only wanna know is it will workin like original one? smooth...

[air23box]

yeah.....but except you wanna to get back to full jdm brembo....there is no point to get the jdm conversion....like vel and vince mention...you can stick with ur audm setup and get the rite brake set for ur car.....that work out cheaper and still do the same job....